LCD Ademco Alarm System with 85 event log

The functions are the same as new sn2300, 5900. Zone is defaulted as below: 1: fire, zone 2: panic zone 3: entry/exit delay, zone 4.5.6: burglar, zone 7: stay arm zone (interior zone), zone 8: medical help

14.   Remote control, listen in, speak, arm, disarm, or turn on/off the siren from a remote phone

13.   Built in rechargable battery which backs up 12 hour when main fails; Built-in siren, and timer Ic, the time keeps right after power off

12.   Unique watchdog function, monitor the old, patient or important place. When one zone is set to be watchdog zone, during a programmed time, if the sensor not triggered, then the panel would alarm

11.   Every zone can be seperately armed/disarmed (24 hours zone can not seperately disarmed)

10.   When using our pir, ceiling mount pir, directional pir and vibration sensor, these sensors can display low voltage on the LCD and should beep

9.       Siren could be set to sound when away arming

8.       every remote can be set to request assistance siren on/off

7.       Every detector can be set to doorbell when disarmed, every detector can be set to locally alarm(do not dial out) when triggered in disarmed mode

6.       Every zone can be programmed seperately,  it can set to be: watchdog zone, exit/entry delay, 24 hours zone, sounder/silent when alarming, armed/part armed zone. e.g. we can set zone 3 with delay timer, zone 4 without delay, or zone 2 is 24 hours zone, while zone 3 is normal zone, etc.

5.       6 groups timed auto arm/disarm, Away/Stay arm optional

4.       When working with Center Station through Ademco Contact ID, the panel can set to speak: after alarm date transmitted, the center station operator can speak directly with the user to make sure whether it is a real alarm or just simply a false alarm, when not working with Center Station, when the panel alarms and auto dial, the user can listen in, speak, sound siren, disarm remotely from users phone.

3.       85 event log about arming, disarming, and alarming. When alarming, the time, zone number and detector number could be viewable on the LCD

2.       English voice prompt for every step

1.       LCD and blue back-up light, all the setting can be viewed directly on the LCD

The sn2200 is a very powerful landline alarm, it supports the international protocol--Ademco Contact ID, the ademco contact ID can report all the messages to the monitor center, including: Fire alarm, burglar alarm, Panic alarm (Stay arm zones alarm), Emergency alarm(SOS), medical alarm, tamper alarm, Pin code wrong 3 times alarm, Main fails alarm, Arm, Disarm, Periodical test (once 24 hours), the main functions for the panel are as below:

 Wired/Wireless Alarm/Security System

LCD Ademco Alarm System with 85 event log: 51 detectors addressable, LCD, ADEMCO ; 85 log, auto arm/disarm, watchdog