AAN-100 Alarm / Access Network Interface Module

The AAN-100 module provides the next generation of advanced technology for integrated access control, alarm monitoring and other security features. Advanced technology such as Flash Memory (eliminating ROMs/EPROMs) for firmware storage and updates, direct interface to various networks (LANs), up to 6 plug-in communication modules, up to 1.300,000 cardholders with plug-in RAM modules, and up to 100 devices such as badge readers, alarm panels and status panels. AAN-100 FEATURES: Download of firmware into 2 megabits of flash memory. Plug-in communications and memory modules. Supports direct network interface/redundant LANs. TCP/IP protocol. Supports RS-232/RS-485/Fiber optics interfaces. Up to 6 communications ports/Dual path to host. 1 MB RAM (AME-10) standard, expandable to 8 MB. Stores up to 250,000 cardholders/65,535 Events. Battery back-up of database and events. Dedicated/dial communications interface to host. Grade AA communications to host/Local printout. Elevator control/Anti-passback/Alarm masking. Directly controls 96 card readers. Supports up to 32 alarm panels (1280 zones). OPERATION: The AAN-100 communicates with APOLLO intelligent magnetic stripe readers, and with Wiegand, proximity and other card reader technologies through the AIM-4 and API interface modules. The AAN-100 also communicates with various APOLLO alarm panels and status panels. All access decisions are made in the AAN-100 using an advanced technology 32-bit processor. The AAN-100 can interface directly to existing networks, thus saving cost and time of installation.The AAN-100 controller comes with 1 MB RAM as standard. You can expand the RAM using AME-10 or AME-20 plug-in RAM modules. The AAN-100 requires 1 to 4 device driver modules (ASM-23 or ASM-48) depending upon how many lines are to be used to communicate with the card reader, alarm modules or status panels. In the network configuration the AAN-100 requires either a single or dual Ethernet module ANI-1 (single or dual networks). For non-network configuration, the dual port high-speed serial interface module (ASI-1) will be required. If the dual port high-speed interface is selected then you must add a single or dual RS- 232 or RS-485 driver module (ASM-23 or ASM-48) for communications to the host. SPECIFICATIONS: Dimensions: 7.5H x 5.5W x 1D (19 x 14 x 2.5 cm). Operating Temperature Range: 0 to 50