Mains (AC Powered) Multi-Sensor Alarm

ApplicationsThe Ei2110 contains two separate sensing technologies Optical and Heat. As such, the unit is capable of monitoring two very different by-products of a fire -smoke and heat so its response to all fire types is significantly improved when compared with traditional single sensor type units.Additionally, because two separate sensors are being monitored, the unit offers improved resistance to false alarms. This is further enhanced by a unique dust compensation feature that automatically adjusts for any contamination within the sensor whilst still retaining sensitivity to an actual fire.The Ei2110 offers particular advantages in areas where risks are undetermined or variable, or where false alarms may be a particular problem, as well as areas where the highest level of protection is desirable.Main FeaturesMultiple sensor elements optical and heatBetter response to all fire types than single sensordevices.Kitemarked to BS EN14604:2005Unique dust compensationRF or hardwired connectivity with other Ei devicesTamper-proof rechargeable Lithium battery back-upBuilt-in Test/Hush buttonEasi-fit base5 year guaranteeInstallationFor full Installation and Siting Instructions please refer to the Installation Instructions and User InstructionsIdeally install in the centre of ceiling at least 300mm(1ft) from light fittings. Interconnect all alarmsRemove unit from mounting plate by releasing catchConnect the house wiring to the mounting plate, noting the live, neutral, IC and earth connectionsEnsure house live mains is correctly connected to L terminals on all interconnected alarms otherwise units will be damagedDo not fit actual alarm until all building work is completed to avoid contamination. After checking operation, cover smoke alarm with dust cover until required for useDont megger the alarm. Disconnect the alarm before applying high voltage to house wiringTrouble ShootingFREQUENT NUISANCE ALARMS OCCUR:(1) Close kitch

Ei2110

Multi-Sensor with Optical & Heat Detectors

  • Country:Taiwan
  • telephone:886-00 353 61 471277
Ei2110

Multi-Sensor with Optical & Heat Detectors
*Your name:
*Your Email:
*To:Shannon Industrial Estate Shannon Co.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Fire Alarm for Energy Storage Power Station

Fire Alarm for Energy Storage Power Station Energy storage power station with fire detection devices in real time collection and the surrounding area environment temperature, concentration of carbon monoxide, hydrogen concentration and the concentration of VOC and smoke ...

Come From Sichuan Xuxin Technology Co., LTD

Fire Alarm Controller for Energy Storage Power Station

Fire Alarm Controller for Energy Storage Power Station The Fire alarm controller is set in each energy storage cabin, with alarm signal acquisition with the cabin detector, start the Fire extinguishing device, linkage alarm, linkage communication with BMS and other functions. ...

Come From Sichuan Xuxin Technology Co., LTD

BLIIoT Network Fault Monitoring Alarm RTU5028E Control AC Contactor

The Network Fault Monitoring RTU RTU5028E is special designed for remote monitoring Ethernet devices communication status and power supply status. It can detect the Ethernet device fault caused by power supply or network communication. If network communication fault, it can ...

Come From BLIIOT