Ekivolta Detectors

Detectors are intended for detecting presence or absence of voltage in electrical installation of alternating current with frequency 50 Hz and voltage from 6 to 20 kV inclusive and from 20 to 35 kV inclusive. The main parameters of detectors: Name of parameters Name of voltage detectors Ekivolta 6-20MEkivolta 6-20K Ekivolta 20-35Ekivolta 20-35K Nominal voltage of electrical installation, kV, not more 6, 10, 12 20, 35 Voltage of indication, kV, not more 1,5 5,0 Interval between pulses, s, not more 1,5 1,5 Number of links, p (including handle) 1 2 Length of insulating part, mm 330 560 Length of handle, mm 150 170 General length of detector in mounted position, mm 750 1025 Mass, kg, not more 0,55 0,6 Detectors are manufactured according to demands of normative documentation and consist of operative insulating part and handle. The handle and insulating part are manufactured from section electrically insulating fiberglass plastic with high dielectric characteristics. Detectors Ekivolta 6-20K and Ekivolta 20-35K ensure combined (visual and acoustical) indication of voltage presence. Visual pulsing light signal is additional indication. Detectors Ekivolta 6-20M and Ekivolta 20-35 ensure optical indication of voltage presence.Detectors Ekivolta have some new technical decisions, which allow using ultra-bright light-emitting diodes and source of sound signal with necessary power without built-in source of power. Effective shade ensures reliable light signal recognition under any illuminance of the working place. Detector doesnt demand working parts grounding.The set of supply can be provided with device ## for determining serviceability of high voltage detectors.Device UPUis equipped with built-in storage battery and represents electronic block in plastic case. Cases ends face detector and with light-emitting diodes for controlling storage batterys discharge and presence of output voltage.One side panel of UPU has the jack for power cord and light-emitting diode for controlling storage battery charging. Switching button is situated on the other side.