Wdl-802gsm Wireless Burglar Alarm System

1.Protection zone: wire : 2    wireless:11
2. GSM band: EGSM900/DCS  1800/PCS   1900MHZ
            TX                             RX
EGSM 880~915MHz     925~960MHz
DCS 1710~1785MHz     1805~1880MHz
PCS      1850~1910MHz     1930~1990MHz
It can save six alarm telephone number and separately set SMS function or telephone
alarm. transmitting power consumption:1W
3.LED indicators:8
4. low power protected time:<1 s
5. Data responds time: <10s (standard network)
6. working power voltage: AC 110~220V 50-60Hz (optional)
   panel power consumption: <3W
   Battery back-up: DC 9v Standby last >4 hours
7. working condition: temperature-20~+60degree 
    Humidity: -20~+60degree
8. Net weight: 0.75 KG.
   Gross weight: 0.85kg.
9. Panel Size:  180mm(l)X130mm(w)X32mm(h)
10.Standard package : one GSM module ,one remote keyboard, two remote controllers,
one PIR, one door magnetic sensor., one siren output, one adaptor, speacker(ooptional), remoteelectric control(optional)

Specification:

1. Wireless type, easy to install, without phone line.
2. Remote control, convenient.
3. Password protected
4. SMS to enable arm/disarm, partial arm/disarm, siren
5. High siren volume so to scare away intruders
6. SMS and auto dial up three phone numbers, locale monitoring start on.
7. SMS to recheck the GSM panel status, alarm report, zone name, arm/disarm status.
8. Audible/mute siren programmed
9. Panic help
10. AC power shutoff self-detected to avoid malice destroyed, automatically switch to
battery back-up
11. Enable to setup alarm receiving central through GSM network.

FEATURES:

GSM network protection, short message sending function. DIY, Customize, easy-to-use
and install!  It features eleven different wireless protection zones,
two wired protection zones, partial disarmed, remote telephone control, remote
electricity control, etc. compatible with CCTV surveillance and centre monitoring system.