Pro Check Walk Through Metal Detector (Black Edition)

In situations where large amounts of steel re-bar exist in a support floorand cause a drop in detection at ankle height; the loss can be compensated by adjusting the sensitivity of the floor level zone. The sensitivity of all six zones can be adjusted independently. They allow uniform detection to be maintained in all regions of the detector. Horizontal Axis Gain Control compensates for detectionlosses caused by external metal in walls or furniture. It adjusts the sensitivity horizontally across each zone.Multiple operating frequencies:The CheckPoint CS-DP provides eight user selectable operating frequencies. They allow simultaneous operation of multiple units without interconnecting slaving cables.
Memory:The CheckPoint CS-D utilizes an embedded microprocessor that analyzes data generated
by 12 detection sensors. Whenever adjustments are made to any operating parameter,
they are automatically retained in memory. When detector is powered down
the previously entered operating parameters are retained in memory.
System security:CheckPoint CS-DP is pass-code protected and has a locking key switch that connects
the AC power. A four digit pass code must be entered before operating parameters
can be accessed and changed. Construction:The CheckPoint CS-DP is coated in a durable scratch resistant two part epoxy finish.
The side panels and header assembly are sturdily constructed for stability and durability.
System diagnostics:The CheckPoint CS-DA/DII has self-diagnostic test routines. When the unit is powered
on, it automatically self-tests and calibrates itself to the surrounding environment.
Periodic calibration is not needed.We provide professional manual, including following information:1) Adjusting security level 2) security level 3) Suggested security level for O.T.P. 4) F.A.A. three gun test 5) Suggested parameters for three-gun test 6) Industrial applications 7) Loss prevention application 8) Eliminating false alarms 9) Operating multiple detectors in parallel 10) Achieving uniform detection 11) Supports floors with excessive structural metal12) Need for detection enhancement 13) Maintenance and repair 14) WarrantyPacking:Wooden frame

Reasons to choose CheckPoint walk-through metal detector:1. Deters crime 2. Improves traffic flow 3. Reduces the number of required searches 4. Reduces workload of security personnel 5. Reduces false alarms 6. Increases building safety with minimal cost 7. Durable material adoption This walk-through metal detector can be used in the factory, prison, court, exhibition hall, stadium and entertainment lieu, where the prohibited articles need tobe checked for safety. Uniform detection:The field of detection is uniform from top-to-bottom with no hot spots or dead spots.

Options:
Removing wheel set
UPS battery back up

Electric current: AC100V-240V/50HZ  
Power: <30W
Workplace environment 0~+45

Alarm: Audio & LED light
Alarm Delay: 1 2 3 seconds available
Password Protection: 4 digit passcode
Sensitivity Level: 0 to 100
Comformity : FCC, CE
Dimensions:
Archway inside- 700mm Wide 2010mm High 500mm Deep
Overall Outside- 800mm Wide 2200mm High 500mm Deep

Detection Zones : 6 zones
Display : LED array 
Control: Remote or Touch pad
Net weight: 100KG

The CheckPoint walk-through metal detectors a true multi-zone metal detector with
new advanced features. It offers superior performance for demanding high security
applications. The CheckPoint walk-through metal detector utilizes special architecture
material that includes powder-coated metal pole and PVC panel, an overlappingnew multi-zone coil system, combining the unique true multi-zone featureswith frequency distribution technology to gain better sensitivity.

CheckPoint series walk through metal detectors is CE approved concealed weapon detector. This walk-through metal detector uses