Conventional DetectorsThe ECO1003 photoelectric smoke detector has been produced using the latest in manufacturing technology and supplied with an array of advanced features, making them better by
design. It uses a state of the art optical chamber combined with an application specific integrated circuit (ASIC) to provide quick and accurate detection of fires.A combination of the unique
chamber design and the other technically advanced features will significantly extend the service intervals before cleaning of the detector becomes necessary. The ECO1003 detector has an integral
LED, which will illuminates to provide a local alarm signal. This latches on, and remains illuminated until the detector is reset by a momentary power interruption. An optional remote LED
annunciator may be used to repeat any alarm signal.A variety of detector bases can be used with the ECO1003 detector, providing application flexibility and compatible with a wide range of Fire
Alarm Control Panels. All bases are fitted with a shorting spring to permit circuit testing prior to fitting the detector and have a tamper resistant feature, which when activated prevents removal
of the detector without the use of tool. FEATURES:Low profile designs. Low current draw. Automatic drift compensation. Operates on 12 and 24VDC Systems. Remote alarm test features. Easy
maintenance. Range of detector bases available. Remote LED Option. Approved to ENS4 7:2000 Amendment 1) LPCB, Vds, CE Certified. TECHNICAL SPECIFICATIONS: Type Photoelectric Operating Voltage Range
8 to 30 VDC (Nominal 12/24 VDC) Max Standby Current 45uA@24VDC Max Permissible Alarm Current 18mA (Limited by Panel) Operating Temperature Range -30 C + 70 C Humidity 5% to 95% relative humidity
(Non Condensing) Height 32.5mm (+9.5mm for standard base) Diameter 102mm Weight 75g (+45g for standard base)