GSM Alarm with Remote Control System

12.  Standby recharger battery to prevent powerfailure or electricity cut off by intruder. The GSM will function as normalwhen no electricity supply. LCD display to check the GSM signal strange andbattery capacity. 

11.  Auto test reporting system after the ownerprogram the reporting time, the WT 1010 will dial the programmable number toinform that GSM Alive. This is to make sure that in case of emergency , theGSM still will function well

10.  The owner will automatically received the SMStext messages for Battery Fail, Telecom Line Fail,  AC Fail,INPUT 1 INPUT 4 Fail, GSM Alive  ifany of the above having problem

9.      In order prevent professional thief todisconnect GSM by using GSM Jammer, the WT 1010 will transmit the alarm ifsignal drop immediately and trigger the siren

8.      Automatically call to 8 pre-program phonenumbers while alarming. The WT 1010 also will sms to 8 programmable phonenumber to notify the user if any intruder

7.      Most of the countries, GSM Mobile operator offercheaper call plan compared to telecom landline. It can connect to the basic telephone to make call and if any intruder,the WT 1010 will cut the telephone call and sent the alarm messages first. 

6.      Open your auto gate with your basictelephone.  Connect the WT 1010 with theauto gate and your house basic telephone. Besides you can use the WT1010 as yourhouse telephone, you also can open your auto gateway by pressing certainpassword at the basic telephone.

5.      Three remote control output. These opencollector outputs (that can sink max300ma per output) can be turned on and offremotely through a SMS or phone call. Remote control will be reachable by sendinga sms or phone call with a certain command. For example sms/call in to switchon lighting, air conditional,  generator ,sensor or other equipment

4.      If the alarm zoning is not enough, the system isoffering lopping concept It can lop up to 50 zoning.

3.      Input alarm zoning can be edited and programmedup to 50 characters long. You can use this function to program any languages.You can change the displayed text by sending a command by SMS to the unit. Forexamples, changing the Zone 4 to DOOR OPEN

2.      It is possible to arm/disarm the unit remotelyvia SMS or phone call. Alternatively, it also can connect to the basictelephone to perform arm / disarm. No remote control is required.

1.      Four digital input  : The system has the function to sent sms  and call to the user in the even ifinput triggered. For example, Zone 4 connected to an electrical door, when there is intruder or electrical door is open illegally, WT 1010 will receive short circuit impulse on Zone 4 and automatically sent a signal to the pre-set number and notify the owner.

GSM Alarm System

try gsm alarm    to get through more products