Mains Powered Carbon Monoxide Alarms With Rechargeable Back-up

ApplicationsCO is a particularly insidious gas; you cant see it, taste it or smell it, but it is potentially lethal. The need for a reliable mains powered detector that will operate even in the event of a mains failure is universally recognised. Until now this kind of detector has relied upon a battery back-up, provided by removable household batteries. Now for the first time it is available with secure 10 year technology rechargeable lithium cells, cells that cant be removed and used in other appliances, cells that have been designed to outlast the life of the alarm. Proven technology used in the brand leading range of Ei smoke alarms.The 260 Series alarms use the latest generation proven electrochemical cell CO sensor which checks CO concentration every 80 seconds. All units are individually calibrated and tested in CO in order to ensure accuracy and peak performance.The sensor module can be replaced quickly and easily after 5 years. It simply clips into the back of the alarm and does not require an electrician.Main FeaturesDigital display activates at CO concentrations above 50ppmEasy to use TEST/HUSH ButtonAutomatic self diagnosticsDistinctive alarm soundSuitable for ceiling or wall mountingPre-alarm warningInterconnect featureOptional security locking screwSeparate optional relay5 year guaranteeInstallationFor full Installation and Siting Instructions please refer to the Use and Care ManualThe Alarm should be permanently wired to the mains by a qualifiedelectrician in accordance with IEE wiring regulationsDo not locate the CO Alarm where it could be exposed to dripping, splashing or condensation(e.g. bathroom, above an electric kettle etc)Install the CO Alarm in or near every room that contains a fuel burning appliance, particularly rooms where people spend a lot of time e.g. bedrooms, kitchens and sitting roomsInstall preferably on the ceiling (300mm from walls) in rooms with an appliance. Install between 1.85m to 3m h