Alarm Box

The address of channel 1~8 is 0,channel 9~16 is 1

1

1

SE600

3

0

1

W110

2

1

0

RM110

1

Setting from address 0

0

0

DCTRLS

0

Note

J2

J1

Protocol

No.

you will see J1&j2 on the board as you open the box (the number1 means open circuit, number 0 means short circuit)

Operate as following figure to connect alarm probe,and connect a resistance(2K)in series connection at NO contact.
S=signal, =ground wire

Protocol setting

Connection

1. Alarm out LED, light means relay closed, off means relay open
2. Alarm in LED, long light means in arm setup status, blinking means arming
3. Communication LED, LED blinks when the communication mode is in accordance with the host computer protocol.

Board LED Indication

Connection Diagram

-10 ~70 indoor

Operating Environment

Multi-protocol setting upon requirement, such as DCTRLS, W110, RM110, SE600, etc.

Protocol

RS485, RS232

Communication

8 normally open relay, AC220V/2A

Auxiliary relay

DC12V/400mA

Power output

DC13.5V

Power Supply

Specification

1. 8 channel alarm inputs, 8 channel relay outputs (NO)
2. Alarm linkage function
3. Watchdog function, auto reset function in strong reference environment.
4. Open circuit and short circuit arm function
5. Provide protocol, 16 ID setting, connect up to 128 alarm probes at maximum.

Main Features

VG-7608A alarm box is a 8 channel alarm inputs, 8 channel controllable normally open relay outputs alarm box, connected with digital video recorder to conduct single or full arm, disarm, enquiry and switch controlling function.

1. 8 channel alarm inputs, 8 channel relay outputs (NO)
2. Alarm linkage function