Wireless GSM Burglar Home Alarm System (JD-007M3)

Certificates: CE, FCC, RoHS and ISO9001: 2000 approved

Remark:
A. Power adapter: Input AC220V; 230-240V; 110V; Output DC 9V, 300mA
B. Wireless frequency format 850/900/1800/1900 MHz supported, also with 315MHz/433MHz Standard pack components 1 main panel 1 wireless infrared (motion) detector 1 wireless door magnetic detector 1 siren 2 remote controllers, 1 power supply 1 manual

12. One on-board relay available for home application

11. Three open collector outputs available to be used according to customer demands

10. For weak GSM signal area an external antenna can be used

9. Fixed telephone line is not needed, Suitable for cottage, house, shop, garage and everywhere GSM network is present

8. Supports any wired sensors available (NC contacts)

7. Supports all kinds of wireless sensors, such as PIR detectors, gas sensors, smoke sensors and infrared balusters.

6. You can control the system by using a telephone anytime, wherever you are. For security reasons a PIN code must be used for access

5. Using remote controllers you can arm, disarm and panic from long distance

4. Can pre-store and dial five phone numbers. If an alarm occurs, numbers will be dialed in order starting with last stored

3. The system can support GSM/CDMA cell phones

2. Alarm system uses a GSM communicator, so is no distance limits to receive alarms or dial out to control the alarm system

1. Is a one-zone alarm system, very suitable for small offices and home appliances

Wireless GSM Burglar Home Alarm System (JD-007M3)