Rolling Code Four-channel Receiver

GD-RF015
Working Voltage:	DC12V
Working Current:	80mA
DC/AC Control Voltage:	DC28V
AC220/250V
DC/AC Control Current:	DC10A
AC 5A

To learn a remote into the receiver, press and release the learning button on the receiver, then press any button on the transmitter 3 times.

Once programmed, press the remote button and the LED on the receiver will flash. Please note that if you use a multi button remote, the buttons are predefined.

This receiver can accept a maximum of 20 remotes.

If a remote is lost, press the LEARN button for more than 8 seconds, this will erase all the data in the memory.

LATOH MOM is for exchanging latched type to memory type.

You can choose different control modes in one receiver board, two latch and two memory, one latch and three memory, three latch and one memory.