35mm KEVLAR GRAPHITE MOVIE CAMERA

--------------------------------------------------------------------------------

 
 
44 0z     body + video tap       400 (500) feet mag  21 oz   1000 feet mag     27 oz

 
 
70/30 splitter  320 TV lines  15 oz   camera body     39 oz     Video tap    5 oz
 

--------------------------------------------------------------------------------

Power supply
 10 / 15  Volts
Current drain
 3 Ah  +/- 0,5  
Speed
 5/50  pushbutton selectable   +/- 1 fps    +/- 0.01 fps
12x2 Lcd display
 Battery level - selected fps - feet and meter counter
Quartz speed control
 PWM via a P.I.D. loop
On/off
 Manual or radio controlled
Film gate
 Full size
Mirror shutter
 180 degrees, stops in viewing position
Lens mount
 Pl or Pv
 
 

   TECH DATA

--------------------------------------------------------------------------------

A new version with Arri3 film gate is now available

--------------------------------------------------------------------------------

. A 16x2 LCD displays the input voltage, the selected speed and the film in feet and meters via a serial protocol that can be transmitted to ground.  The electronic sounds an alarm beep and stops the camera when the actual film speed does not matches the selected one. The mirror stops in viewing position. The lens Mount is PL/PV interchangeable. We can custom build a camera for your needs.

The camera has been developed from an Arri IIc mechanism.  The extensive use of graphite and Kevlar fibers gives tremendous strength and stiffness.  The film gate depth is more stable than with other metal housings.  Film steadiness has been increased: the pin has been rebuilt from a solid piece of bakelite like the Arri 3 camera and a registration pin has been added. Custom made electronics drive a crystal sync motor control via a pid closed loop. The speed is keyboard selectable between 5 to 50 fps  +/-0,01.

--------------------------------------------------------------------------------

35mm KEVLAR GRAPHITE MOVIE CAMERA