The device is destined for operational measurements as far as detection and location of the bugs are concerned. It consists of main control-measurement unit and converters kit. The devices can be
used in such modes:
- High frequency detector-frequency meter;
- Scanning wires analyser
- Infrared detector
- Low frequency magnetic field detector
- Vibro-acoustic receiver
- Acoustic receiver
- Wired acoustic receiver
The process of switching into other operation mode is made automatically (connection of proper converter is necessary) .
Information is displayed on LCD; acoustic control is realized by special headphones or the speaker that is built-in.
Device control takes place by membrane keyboard (16 keys) .
The detector enables conversion of the low frequency received signals in the oscillograph mode, or spectrum analyser together with picturing of the variables.
TECHNICAL DATA:
Band width: 22 kHz
Input sensitivity: 10 mV
Measurement error: 1%
Oscillograph display speed: 0, 2 s
Spectograph display speed: 0, 3 s
Graphic resolution of the display: 128 x 64 points with backlight adjustment
Number of stored information, loaded from permanent storage: from 15 to 60 pictures
Main unit
Dimensions: 180 x 97 x 47 mm
Weight: 0, 8 KG
Power 4, 8. . . . . . 6 V
High frequency detector-frequency meter
Operational frequency band: 30. . . . . . . 2000 MHz
Sensitivity:
200 MHz. . . . . . 1000 MHz-< 2 mV
1000 MHz. . . . 1600 MHz-< 4 mV
1600 MHz. . . . . . 2000 MHz-< 8 mV
Dynamic range: 60 dB
Frequency meter sensitivity:
< 10 (100 MHz. . . . . . . 1200 MHz) .
Frequency measurement accuracy: ? 0, 01 MHz
Outside antenna dimensions: L = 160 mm, D = 20 mm.
Scanning wires analyser:
Scanning range: 0, 01. . . . . . . 10 MHz
Sensitivity: < 0, 5 mV
Scanning step: 5, 0 kHz
Scanning speed: 50. . . . 1500 kHz / s
Band: 10 kHz
Next channels selectivity: 30 dB
Detection modes: AM, FM
Permitted voltage: 600 V
Infrared detector
Spectrum range: 770. . . . 1000 nm
Threshold sensitivity: 10. . . . 13 Vt / Hz?
Angle of view: 30 degrees
Frequency band: 6 MHz
Infrared sensor dimensions: L = 40 mm, D = 24 mm
Low frequency magnetic field detector
Frequency band: 0, 3. . . . . 10 kHz
Threshold sensitivity: 10-6A / 2 x m x Hz
Dimensions: L = 230 mm, D = 24 mm
Vibro-acoustic receiver
Sensitivity: 1 V x s2 / m
Internal noises in the band: 300 Hz. . . . . . 3000 Hz: 50? V
Dimensions: L = 20 mm, D = 25 mm
Acoustic receiver
Sensitivity: 50V / Pa
Frequency band: 300. . . . . 3400 Hz
Dimensions: 20 x 10 x 5 mm
Wired acoustic receiver
Weak noises amplifier-frequency band: 20. . . . . . . . . 10000 Hz
Noise input level: 1V.
Gross price:
ST 031
Multifunctional detection device-3762 euro
ST 031P
Multifunctional detection device with a digital interface-4752 euro
_Accesoriess: _
DSVCH 031 additional antenna up to 9 Ghz for ST031 (P) -699 euro
TEST
Unit of check on the performance of the multifunctional detection devices-316 euro,
The device is destined for operational measurements as far as detection and location of the bugs are