DIY CCTV System

     2) Adapter : DC 12V, 500mA, 60Hz x 4 pcs

     1) Cable : 20M x 4pcs

4. Cable & Adapter

     9) Input Power : AC 100~240V,  50/60Hz

     8) Input Signal : D-sub x 1 / DVI x 1 / Sound(stereo) x 1/ Composite x 1/ S-video x 1

     7) Viewing Angle : 160(H) , 160(V) / 160(R), 160(L)

     6) Response Time : 5 ms

     5) Contrast Ratio : 800 : 1

     4) Brightness : 300cd / m2

     3) Pixel Pitch : 0.264 x 0.264mm

     2) Max. Resolution : 1208 x 1024

     1) 17" TFT Color LCD Monitor (LG Panel Using)

3. Monitor

    13) Power source : DC 9V~12V (Recommendation DC 12V)

    12) AGC : Auto

    11) White Balance : Auto

    10) Min. Illumination : 0.1 Lux / F2.0

     9) Lens : Fixed Lens ( 80 degree f=3.6)

     8) Video Output : 1.0Vp-p Composite. 75Ohms

     7) S/N Ratio : More than 50 dB

     6) Total Pixels : 410K

     5) Resolution : 550 TVL

     4) Scanning Frequency : 15.734KHz (H) , 59.94KHz(V)

     3) Scanning System : 2 : 1 Interlace

     2) Image Sensor :  1/3" SONY Super HAD CCD

     1) Signal System : NTSC ( or PAL)

2. Camera

   12) External Interface : RS-485(PTZ camera control), Ethernet(TCP/IP)

   11) HDD Capacity : 1 SATA Internal HDD(No limit in capacity of HDD)

   10) Motion Deteck : Area Division : 30 x 24

    9) Alarm : In : 4(NO/NC Seletable) Out : 1 (Realy Output)

    8) Network : Remote Monitoring & Download using Remote Viewer Web Solution

    7) Back up : USB host

    6) Multi Language : English, Sparish, Italian, German, Russian, Japanese, Chinese

    5) Recording Mode : Schedule(Time, Motion, Alarm)

    4) Multi Plex : Triplex Operation(Recording, Playback, Ethernet)

    3) Recording Rate : 120(100) ips @ 352 x 240 (352 x 288)

    2) Algorithm : H.264 Hardware Codec

    1) 4 CH, With 160G HDD

1. DVR

DVR(4CH, with 160G )+ Monitor(17" TFT LCD) + Dome Camera(4pcs) + Cable & Adapter