- UL Listed Wetting Agent for Class A, B, D & K res UL 2N75
-
US Forest Services Qualied Product List (QPL) as an approved agent for wild
fire applications.
-
Cold Fire surpasses other products on the QPL in terms of health & safety hazards and use restrictions.
-
EPA SNAP listed (Signicantly New Alternatives Policy) for alter - natives to toxic products currently on market
-
Acceptable substitute for toxic foams and Halon 1211 (EPA)
- Classied by the EPA under Surfactant Blend A Hazardous Materials Identication System (HMIS) rating of 0,0,0 Tested according to NFPA 18 & 13 Standards
- Cold Fire is NOT a gel
- 100% soluble in water
- Extinguishes Fire (even oil and polar solvent fires) quickly and on
contact; effective on oil well and tanker fires, tire fires, fuel/ethanol
fires, grass,flammable metals, brush and forest fires.
- Cold Fire is ONE agent that can replace SEVERAL products
- Can be used in dilutions down to .5%
- Can be applied by helicopters with Bambi buckets and used in
pumping stations along firelines.
-
Environmentally-friendly, water-based, biodegradable fire extinguishing agent
-
Removes the heat and encapsulates the hydrocarbons in the fuel
source to extinguish the fire more rapidly.
-
Removes heat without conversion of water to steam
- Non-toxic, non-carcinogenic and non-corrosive - can be dumped
directly into booster tanks with no need to flush out lines.
-
Indenite shelf life - still effective after multiple freeze/thaw cycles.
- Can be stored indenitely in boosters, water pressurized units and
closed loop systems. You do not have to throw away unused
product after a year.
- Extinguishes fires quickly without harming the environment
- Can be sprayed directly on structures to keep them from igniting.
- Leaves no film or visible residue, so no cleanup is necessary
-
Allows fire fighters to do their job more quickly and safely, saving
more lives, property and the environment.
-
Thermal insulation capability protects against heat exhaustion
.
-
Cools objects much faster than water - Cold Fire outperformed
water in surface/mass cooling comparisons ranging from 5:1 for
glass, and up to 21:1 for metals.
-
Prevents re-ignition when properly applied.
- Reduces hydrocarbon smoke and increases visibility
- Improves penetration six times better than water alone,
- extinguishing the fire faster, using less water, reducing water
damage and cleanup requirements
- Can be winterized to -65? Below Zero for use in 1.5 and 2.5
gallon water extinguishers and re suppression systems.
-
No special equipment and no special training is required
- Can be added to boosters no matter the hose length, unlike foams