Wireless Intruder & Fire Alarm-DIY

The RT-108 repeater extends the communications range by relaying data signal between the remote wireless transmitters and the control console. Multiple repeaters can be used to extend the coverage area when the control console and the transmitters distance is beyond the normal RF communication range.

DK-913 allows the user to command the control console and operate the alarm system from a commonly used entry/exit point of premises by simply enteringn a personal ID code (PIN) plus a command button on DK-913 to activate or deactivate the system.

DE-525 detects smoke due to fire in the premises and provides early warning signal to the control console. It also has its own built in alarm siren which will send warning alarm in case of fire and emergency. Once armed, Periodic signal transmission is used to confirm system connectivity at all times. It is also capable  of monitoring its own battery level and report when the battery needs replacement.

This device is capable of monitoring a large area (for example, living/dining area and hall way) by detecting intruder's body heat and movement simultaneously. When the body heat and movement is detected, a RF signal is sent to the control console to activate the alarm. Multiple DA-751 can be mounted at the critical locations or zones through out premises for added securoty. It is capable of monitoring its own battery level and report when the battery needs replacement.

DT-991is a miniature pendent wireless transmitter designed for emergency remote control. Emergency alarm can be activated by simply pressing the button at the center of transmitter. This transmitter available in watch or pendant type. This is ideal to be worn by elderly and used in case of emergency.

DH-235 is the art of outdoor alarm siren designed with latest reliable solar power technology. It can be easily mounted on the outdoor surface of the premises. In the event of emergencies, it will activate its piercing siren and bright flashing warning light to deter intruder and notify you or your designated central monitoring system centre.

This high reliable wireless device is easy to install and operate in a wide range of environments. Capable to support combination of looping magnetic and vibration sensors up to 40 nos per transmitter. It also capable of monitoring its own battery level and report when needs replacement.

Allows individual to set the protection level conveniently with touch of a button. Also able to activate the alarm and summon for emergency assistance by simple pressing the PANIC button twice.

Accessories

Sensors battery level report when the battery needs replacement

Low battery power warning for main and back-up unit and transmitter

Optional two-way listen-in and remote programming

7 segments rectangular LED displays

Super heterodyne technology receiver

EEProm retains programmed data and voice messages in event of power lost

3 operation modes: Away, Home and Panic

More than 260 million dynamic code combination

4 pre-recorded voice messeges for specific emergency situation

8 emergency contact numbers

8 buglary zones 4 emergency alert modes

The Control Console (DA-884) which receives and processes signals from sensors to detect intrusion or smoke and respond to emergency. It allow user to program control zones and command options for the premesis according to individual's preferences.

System Features 

Complete wireless security system for intruder and fire alert suitable for home, office, warehouse and factory use. DIY ready.