Fire Hydrant Valve Pn10 / 16
Product Details
* The form of the hydrant is so that it can be easily upon impacts.
* The flange between the pipes is connected by 4 semi-cut screws. So in case of any stroke or impact the upper part is removed easily
* Turning capability
* Bonnet can be removed by opening 4 stainless steel bolts with 360 C
* Drain via a pipe made of PE
* Opening stroke: 50mm
* The other parts are also resistant against corrosion and friction
* O-rings resistant against corrosion (DIN3547-T1)
* Galvanized pipes with epoxy powder coating
* Spindle made of stainless steel 1.4021 (X20Cr13) and rolled thread with high strength
* Wedge made of RG7 encapsulated with EPDM and resistant against friction and tear
Base and bonnet made of ductile cast iron GGG40 (DIN1693) covered with epoxy powder fluidized bed coating with thickness of minimum 250?
Base and bonnet made of ductile cast iron GGG40 DIN1693 covered with epoxy powder fluidized bed coating with thickness of minim
- Temperature of Media:High Temperature
- Material:Casting
- Media:Water
- Standard or Nonstandard:Standard
- Place of Origin:Iran (Islamic Republic of)
- Country:Iran (Islamic Republic of)
- telephone:98-311-7781676
| Temperature of Media: | High Temperature |
| Material: | Casting |
| Media: | Water |
| Standard or Nonstandard: | Standard |
| Place of Origin: | Iran (Islamic Republic of) |
