Fire Alarm Control Panel

What we supplied is market and enginer confirmed products ,If you still have any questions about the products, pls contact us freely,we'd like to have a further talking with you on it.any inquiry from you will be replied within 24 hoours.

The CK1000 Series Conventional Fire Alarm Control Panel is a 24 volt, four to sixteen-zone, Class B,
Conventional Fire Alarm Control Panel. Designed exclusively to meet the latest market requirements and
future ULC codes, the highly cost-effective CK1000 Series can be used in a variety of low- to mid-sized
applications.
FEATURES
Four, Eight, Sixteen Zone Style B (Class B) Initiating Device Circuits (IDCs), All zones accept
two-wire smoke detectors and any normally-open contact devices.
Two Supervisory Input with DC12V output, ideal to connect security alarm devices.
Three General Alarm, Trouble and Supervisory, Form A Relay Output.
One, Two, Four Built-in Sound Output, Style Y (Class B) Notification Appliance (Signal) Circuits
(NACs), NACs may be programmed: Silenceable or Non-Silenceable.
3.0 amps of total system power. Resettable DC24V & Non-resettable DC24V Output.
Zone Input Short Circuit can be set to Alarm or Fault mode.
RS485 Communication Port (optional).
Automatic/Manual mode can be programmed.
Disable/Enable control per Zone (IDC) can be programmed.
Disable/Enable Sound Output(NACs) can be programmed.
SPECIFICATIONS
AC POWER: 220VAC, 50 Hz.
BATTERY: Sealed lead-acid batteries only. Maximum charging circuit: 27.6VDC @ 0.8 amp for
normal flat charge. Maximum battery charger capacity: 18AH battery.
NOTE: Two 10AH batteries can be housed in the cabinet. Larger batteries require a separate
battery box.
Total DC24V system power: 3.0 amps.
Maximum current per NAC: 1.25 amps.
Maximum battery charging capability: 18 AH.
Resettable four-wire smoke detector power output.
Non-resettable power output.
Integral Form-A Alarm, Trouble and Supervisory relays, rated at: 2.0 amps @ 30 VDC
(resistive), 2.0 amps @ 30 VAC (resistive).
CABINET AND MOUNTING
Cabinet physical dimensions: 40.0 cm high x 35.0 cm wide x 11.5 cm deep.
Carton package dimensions:: 48.0 cm high x 42.0 cm wide x 18.5 cm deep.
Cabinet net weight: 6.0 Kg. (without batteries).
Cabinet gross weight: 6.6 Kg. (without batteries).
Mounting: The cabinet mounts using two key slots at the top of the back and two additional
6.5mm diameter holes at the bottom.

This fire alarm control panel have 4 ZONES,8ZONES&16ZONES.
It's a market confirmed system we supplied
It has gotten good honor