Hochiki HVAC Duct Mount Smoke Detector

Quantity in Basket: None
Code: DH-98
As Low As $132.95
Add To Order
QtyPrice Ea.
1-11 $149.95
12-35 $139.95
36+ $132.95

Shipping Weight: 3.00 lbs
 
Quantity:
 
  

The HOCHIKI AMERICA DH-98 Duct Smoke Detector provides early detection of smoke and products of combustion present in air moving through HVAC ducts in Commercial, Industrial and Residential applications. The DH-98 is designed to prevent the recirculation of smoke in areas by the air handling systems, fans and blowers. Complete systems may be shut down in the event of smoke detection. The HOCHIKI AMERICA DH-98-I and the DH- 98-P operate on 115 VAC, 24 VAC and 24 VDC and the DH-98-HVI and the DH-98-HVP operate on 230 VAC, 24 VAC and 24 VDC.
The DH-98 is designed and built to meet all local requirements, as well as the NFPA regulations regarding duct smoke detectors. Output terminals are provided for remote accessories such as a horn, strobe, remote status indicators and reset key switches or push buttons.
Air sampling is accomplished by two tubes which protrude into the duct. An exhaust tube of one standard length (7.5") is supplied in the installation kit with the smoke duct unit. Once the duct width has been determined the air intake sampling tubes must be ordered. Sampling tubes are supplied in three standard lengths 2.5 ft., 5 ft. and 10 ft. and cut to size to fit the duct. Mounting the duct smoke unit is accomplished by the use of a template and 4 sheet metal screws, which are provided. Mounting can be achieved without the removal of the clear cover which is secured by 4 capture screws.
The compact DH-98 contains 3 sets of alarm contacts, 1 set of form ?contacts rated at 10 amps, 1 set of form ? contacts rated at 10 amps, 1 set of form ?contacts rated at 1 amp. There is also 1 set of form ?10 amp trouble contacts for monitoring detector head removal, and the failure of the input supply voltage. The pilot and alarm visual indicators provided on the front of the DH-98 duct unit, signal the operating status of the device. A manual test/reset switch is located along side the visual indicators.

Standard Features

?Detects and limits the spread of smoke throughout building HVAC ducts
?Ability to interconnect (all relays operate with a single alarm) up to 30 units using the same independent power supply
?Compatible with building automation and fire alarm systems
?Installs quickly and easily
?Interchangeable lug-In?photoelectric or ionization heads
?No screens or filters to clean
?Cover provides magnet window and placement guide for operational testing without disassembly
?Rugged gray steel back box with clear cover
?Accessories - Remote power, remote alarm indication capability and remote, horn/piezo capability

Dimensions

9 1/8"L X 7 1/4"W X 2 1/4"H Weight 3 lbs.

Hochiki HVAC Duct Mount Smoke Detector, Ionization or Photoelectric Plug In Heads, 115VAC, 24V AC/DC

  • Country:United States
  • telephone:1-866-394-8688
Hochiki HVAC Duct Mount Smoke Detector, Ionization or Photoelectric Plug In Heads, 115VAC, 24V AC/DC
*Your name:
*Your Email:
*To:Resculite
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

System Sensor HVAC Low Flow Duct Smoke Detector

System Sensor HVAC Low Flow Duct Smoke Detector, 2 Wire Photoelectric Sensor, 12/24 VDC ...

Come From Resculite

AP HVAC Duct Smoke Detector

AP HVAC Duct Smoke Detector, Photoelectric or Ionization, Multi Voltage, Easy Mount ...

Come From Resculite