The detector can be completed with the module M-1 for the control of loop power voltage and for the installation of a terminal resistor.
The detector has functions of standby mode indication (a red LED flashing).
The detector is counted on the continuous 24-hours operation along with a fire-intruder control panel by the 4-wire connection scheme of detectors with the nominal voltage of loop supply 12 V.
The SPD-3.3 combined heat smoke detector is designed for the detection of ignitions in enclosed premises of different buildings and constructions which are accompanied with the appearing of smoke as well as of the exceeding the threshold value of ambient temperature and for the transmission Fire signals to control panels.
The detector has functions of standby mode indication (a red LED flashing).
Power voltage, V: | 12 ? 1,2 |
Average lifespan, years: | e 10 |
Weight, kg: | 0,15 |
Dimensions, mm: | dia. 100*46 |
Lag, s: | d 10 |
Sensitivity, dB/m: | 0,05-0,2 |
Model Number: | SPD-3.3 |
Place of Origin: | Ukraine |
Input Voltage: DC10-35V Static Current: not more than50uA Alarm Current: 40-80mA Operating Humidity: 10%-95%RH Operating Temperature: -10 Celsius - 55 Celsius Alarm Reset: Auto reset Alarm Temperature: Fixed Temp.: 57 Celsius/137F Rate-of-rise: 8-15 Celsius/Min LED Indication: ...
Input Voltage: DC10-35V Static Current: not more than50uA Alarm Current: 40-80mA Operating Humidity: 10%-95%RH Operating Temperature: -10 Celsius - 55 Celsius Alarm Reset: Power off reset Alarm Temperature: Fixed Temp.: 57 Celsius/137F Rate-of-rise: 8-15 Celsius/Min LED ...
Model Number:AH-0316 Brand Name:HORING LIH Place of Origin:Taiwan Special chamber design has greatly decreased its dust existence and relatively increased its detection accuracy. ...
Come From Aljibra Technologies