S2000-ASPT fire-extinguishing panel is designed for autonomous or centralized (within the ORION integrated security system) fire-fighting in residential and
industrial premises (in one zone) using powder, aerosol or gas.
-
Status control of three fire alarm loops, door detector circuits and circuits of manual start detectors
-
Operability testing of starting circuits; open- and short-circuit failure detection
-
Start and operation control of automatic fire-extinguishing equipment; consumption control of fire-extinguishing substances
-
Remote start of automatic fire-extinguishing equipment by commands from the S2000 panel or manual starting devices
-
Adjustable time delay before the start of automatic fire-extinguishing equipment
-
Start of automatic fire-extinguishing equipment using a manual device (detector)
-
Automatic start of fire-extinguishing equipment if two fire detectors have operated in one or two loops
-
Activation of sound and light fire notification (siren, lights etc)
-
Steering ventilation gates (latches) and other equipment
-
Automatic start cancellation if a door of a protected room is open
-
Manual (from device keyboard) or remote (from the S2000 panel) start cancellation of automatic fire-extinguishing equipment and of fire alarm
-
Automatic start activation/deactivation of fire-extinguishing equipment by electronic keys Dallas Touch Memory
-
Control of up to 16 S2000-KPB relay modules
-
Alarm and routine message transmission to the S2000 panel
-
Access restriction to the operating control on the front panel by an electric lock
-
Tampering (breaking into the box) detection
-
Back-up accu-battery (built-in)
-
Mains (AC) and back-up power supply control; discharged battery disconnected automatically
-
Comprehensive auto-diagnostics with fault type indication
SPECIFICATIONS
-
Number of alarm loops - 3
-
Loop voltage - 24 V DC
-
Power supply voltage of 4-wire detectors - 12 V or 24 V
-
Back-up battery - 12 V DC; 7 Ampere-hours
-
Mains voltage - 187 V to 242 V AC
-
Voltage and current of the relay outputs Fire, Fault and Smoke removal 28 V, 2 A/80 V 0,1 A
-
Control outputs for external detectors 28 V, 0,5 A
-
Starting circuit 24 V, 0,5 A
-
Capacity of the Touch Key Memory - 15 keys
-
Dimensions - 310x254x85 mm
-
Weight - 8 kg
|