infrared Flame detector

Applicable to places

• Rated Voltage: DC24V voltage range: DC18-30V
• Operating current: 25mA (surveillance), 35mA (alarm), 50mA (self)
• Angle range: 110 o
• Detection range: 35 meters (0.3m * 0.3m petrol fire) 
•                          50m (0.3m * 0.3m n-heptane fire) 
•                           60 m (0.7m * 0.7m petrol fire)
• Response time: <5S (0.7m * 0.7m gasoline fire)
•                        <10S (0.3m * 0.3m gasoline fire)
• Sensitivity rating: 50%, 75%, 100%
• Storage temperature: -40 ~ 85
• Operating temperature: 0 ~ 50 (standard)   -40 ~ 70 (enhanced)
• Operating Humidity: 0 ~ 95% RH (non-condensing)
• Output Type: fire relays, normally open output contacts, 2A @ 30VDC (standard)
• Fault relay, normally closed output contacts, 2A @ 30VDC (standard)
• 0 ~ 20mA current loop output (optional)
• RS485 output (optional)   CAN bus output (optional)
• Explosion-proof grade: Exdll CT6
• Protection grade: IP66
• Shell material: aluminum alloy, the surface protective coating
• Chinese standards: GB16531-1995, GB3836.1-2000, GB3836.2-2000

Technical characteristics

12. Low maintenance costs, easy update to improve

11. Hazardous area explosion-proof design for industrial use

10. For heavy industry applications

9. Reliable function of self-diagnosis system failures

8. For sunlight, artificial light, thermal radiation interference will not occur, such as False Alarm

7. The best combination of flame detection and the ability of anti-False Alarm

6. Access to the new standard perspective (110 degrees), has better detection of regional

5. Maximum detection distance of 60 meters

4. Earlier detection of small fires

3. A single detector for a variety of fuel

2. 3 narrow-band IR sensor

1. Built-in high-performance 32-bit microprocessor chip computing

Performance characteristics

Detector to detect the most long-distance sensitivity of the corresponding I-class 60m, II-class sensitivity of 45m, III-class sensitivity of 30m.

    The detectors is the explosion-proof products, it can be used for general civilian sites can also be dangerous places for the industry, such as the explosive gas environment

    The detectors suit for smoke-free liquids and gases and smoke fire flame of fire detection, carbon materials, such as the fire burning (wood, plastics, alcohol, oil products, gas, etc.), does not apply to supplies of certain chemicals ( such as phosphorus, sodium, magnesium, sulfur, hydrogen and other materials) burning.

    This infrared Flame detector IR3 tri-band infrared flame detector is a composite infrared flame detector. The detector characteristics of the use of three different narrow-band filter wavelength infrared sensors, receiving the flame radiation characteristics of the different wavelengths of radiation energy, and then through the built-in 32-bit microprocessor and proprietary signal processing algorithms,and more effectively identify to distinguish between flame radiation and non-flame radiation (interference), even in the False Alarm or in the environment where has the source of infrared radiation is still able to provide continuous protection requirements of the flame detection ,applicable to the strongest anti where needs the highest level of detection capability at the same time needs strongest anti False Alarm capacity .

Brief Introduction

try flame detector    to get through more products