Accessories for Fire and Gas Alarm Control Systems

The bell is designed to meet requirements of superior performance with low current consumption. It can be installed directly onto a wall or by use of any standard mounting box. A built-in varistor suppression element is incorporated to micro-motor unit of the bell to reduce EMI and RFI effects. The bell is well-suited to various indoor and outdoor applications, where strong audible warning is required, such as schools, apartments, hospitals, office buildings, and hotels.

MG-5400 Fire Alarm Bell (6 inches):

The strobe has both audible and visual alarm features. The sounder is mounted 2 metres above the floor and so that the audible alarm of 75dB can be heard at every part of the protected area. The maximum audible signal power of the sounder is 105dB(A) 24V DC at 1metre. The strobe has 3W power and a flash rate of 150/min. The sounder strobes are SSPB (Russia) certified and approved by Kazakhstan, Oman and UAE Civil Defence authorities.

MG-5200 Electronic Sounder Strobe:

Sounder is mounted so that an audible alarm of 75dB can be heard at every part of the protected area. The maximum audible signal power of the sounder is 105dB(A) 24V DC at 1metre. The sounders are SSPB (Russia) certified and approved by Kazakhstan, Oman and UAE Civil Defence authorities.

MG-5000 Electronic Sounder:

MG-7050 switched mode power supply have 2.5A 24V DC output current respectively. The power supplies perform continuous fault monitoring (earth, batteries, 24V DC, 220V mains fail etc.). Power supplies are microprocessor-controlled. The power supply units are EN 54-4 certified and approved by Kazakhstan, Oman and UAE Civil Defence authorities.

MG-7050 / MG-7080 Power Supply Units:

Specially designed for marine applications, back box is used at media with harsh weather conditions. Back box is surface-mounted. The box is compatible with all MaviGard conventional and analogue addressable fire detectors. The device has also MARINE Certificate.

MG-3700 Back Box:

Recessed mounting base is used for mounting conventional as well as analogue addressable detectors on false ceilings of various types (metal, plaster etc.) The base allows creating more aesthetic architectural applications. Bases are produced from ABS and have the came colour as detectors. Bases are flush-mounted into ceiling with two clamps and stainless steel screws.

MG-3600 Recessed Mounting Base:

This is an input output module used for general purpose. It has 3 inputs and 3 outputs connected these outputs respectively.

MG-IO General Purpose Input/Output Module:

Remote indicators facilitate identifying the alarm location by matching the triggered detector placed above false ceiling or rooms.

MG-4000 Remote Indicator:

The bases are compatible with MG/MGR-2000 Series conventional fire detectors. Remote indicator output is standard for MG series detectors. Universal mounting base has Ni-Cd coated corrosion-proof clamp type contacts.

MG-3500 Conventional Mounting Base:

The products are SSPB (Russia) and GOST R certified and approved by Kazakhstan, Oman and Bahrain Civil Defence Authorities