W Series Door Lock

UL: 3 hour A label.

ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 2.

Screws: Furnished with combination screws for use in wood or metal doors and frames.

Strikes: 4-7/8 x 1-1/4 ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard. Consult Options and Accessories section for other available strikes, sizes and configurations.

Latches: 1/2 bolt projection made of stainless steel and UL listed for 3-hour door assemblies. Latches have self-adjusting fronts to accommodate beveled or flat doors. 2-3/8 backset with 2-1/4 x
1 latch faces or 2-3/4 backset with 2-1/4 x 1-1/8 latch faces.

Trim: Roses are 3-5/8 diameter, heavy wrought brass or bronze, installed over steel rose inserts which are through-bolted through door. Levers are pressure-cast zinc (solid levers-no-inserts) finished to match mating parts.

Keyways: G keyway standard on Falcon standard cylinders. A keyway standard on I/C core cylinders. Also available with some optional keyways. Schlage C keyway also available on standard cylinders.

Competitor Cylinder: The W Series accepts standard 6-pin cylinders available from Falcon, as well as Schlage, Corbin-Russwin, Yale and Sargent.

Cylinders: Pinning in six chambers. Cylinder assemblies removable to re-key. Also available with 6- or 7-pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass.
Springs are stainless steel. Two nickel silver keys furnished standard.

Handing: Locks are non-handed.

Attachment: Lock chassis secured to door by two screws which pass through a steel rose insert inside and thread directly into the outer rose-mounting assembly, and two screws that screw into the chassis assembly.

Mechanism: Parts constructed of brass or cold-formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.

Backset: 2-3/4 standard; 2-3/8 also available.

W Series
LOCK FEATURES
Door Thickness: 1-3/8" to to 1-3/4 standard.