Body Armor

Standard Protection: Front & Back protection only
Optional Protection: Sides, Top shoulder, Neck & Groin protection or by order
Optional Sizes: S, M, L, XL or by order
Optional Colour: Black, White, Navy, OD Green, Tan, UN blue, Camouflage or by order
*For more technical information, please contact us to get the catalogue and test report.

.

*All of the vest and plate has tested by U.S H.P white Lab. or China Bullet Proof Test Center.

*Easy to upgrade to level IV after with level IV ceramic hard armor insert plate

*Easy to upgrade to level III (plus AK47 MSC) after with level III hard armor insert plate

*Contact us to confirm if for level IIA, 9x19mm, II .357Magnum, 7.62x25mm Tokerav (TT pistol).

Or against at least 6 shots of 9mm FMJ RN 124gr. (8.0g) @ 436m /s (1430ft/s) stand alone from 5 meter.

Or against at least 6 shots of .357SIG FMJ FN 125gr. (8.1g) @ 448m /s (1470ft/s) stand alone from 5 meter.

Against at least 6 shots of .44Magnum SJHP 240gr. (15.6g) @ 436m/s (1430ft/s) stand alone from 5 meter.

Meet NIJ 0101.04 or 2005 Interim or 0101.06 Levels IIIA (9 mm, .357SIG and .44Magnum)

BALLISTIC PERFORMANCE of SOFT ARMOR PANEL (SAP):

.

The soft armor panel (SAP) is the ballistic system of the vest. It is made from lightweight and high performance bullet proof material -- non woven unidirectional sheet (UD). The UD is made from the strongest UHMWPE fiber with high end technology and it has become main bullet proof material in the world. The SAP is made from multi layers of the UD and sews into a water resistant Nylon black cover in standard.

FEATURE of SOFT ARMOR PANEL (SAP):

.

Feature: side open system and open from front to back. Connect by Velcro and adjustable at sides and shoulder. Have two pieces 25x30cm plates insert pocket at front and rear side and two M16 cartridge clip pocket at front and sew on or beside the front plate pocket. With detachable shoulder, collar and groin protect but without extra carry bag and the trauma plate for standard packing. (*Contact us to confirm for OTV if the standard design or material is not match the demands)

Color: as order (Available one color of black, white, moss green, UN blue, woodland, desert or by order)

Sewing material: Nylon Velcro, Polyester sewing thread

Liner material: same as surface material (optional with lightweight Nylon liner)

Surface material: Polyester Oxford fabric with PU coat, water resistance (optional Nylon or Cordura).

FEATURE of OUTER VEST (OTV):

.

The lightweight and high Performance bulletproof jacket is made from - High Performance Polyethylene Bulletproof Unidirectional (UD). The could make depending on the customer ordered protect level (like NIJ stnadands level IIA, II, IIIA or by order) and it is very lightweight, confortable, and soft wear. The standard design protect front, back, sides, shoulder, collar and groin and contect by velcro but optional for differenct design by order.

lightweight, confortable, soft wear and high ballsitic performance bullet proof jacket which made from the strongest UHMWPE UD.