Export Sequential System

Description of group
The Sequential System is composed by Led lights. The system works with a synchronization system via cable without any central box. The transmission of the synchronization signal goes on directly from one light to the following one.
The led lamps are composed by a back side orange colour moplen case and a lexan shockproof lens.
The System is composed by one Master light at the beginning of the sequence and a variable number of Slaves lights.
The Master light has 2 connectors. One male connector for the connection of the power supply cable, and one female connector for the connection with the Slaves lights. From the master light it is possible to choice three different speed of the flashing, switch on the 24h working option or the nightlight option, and it's possible to switch on a nightlight guide light.
The Master light is able to check the battery charge level, when it arrived at a tension under 12 Volts, a red light starts lighting on the back side case of the light.
The Master is programmed to automatically manage the brightness intensity of all the lights. In this way all the lights will have always the same light intensity level. The Slave is provided with one cable and one connector. The cable permits the connection with the master light and the trasmission of the incoming synchronization signal. The female connector permits the connection with the following slave light and the trasmission of the synchronization signal.
On request the sequential system could be supplied only with the slaves lights. In this case the sequential system has less functions (it is not possible to select the speed, switch on the nightlight option and the guide light). The sequential system without the master permits to the user more flexibility in its usage: for example if the user has an 8 slave lights sequential system it is possible to divide it in two 4 lights systems (in the case of a system made only by slave lights it needs an additional adapter cable for the connection with the power supply cable).

Note of group
The slave lights of this sequential system are compatible with the lights of the the previous model of the sequential system.
In the case of a only slave lights sequential system each slave is able to automatically regulate its own intensity light according to the level of the daylight brightness. In the bottom part the lights are equipped with a cup for the application of the system over rubber cones, PVC panels, on delineators and other kinds of supports as poles etc.
The power supply is supplied by a 12volts battery (a 100Ah battery is recommended) and/or a feeder 230/V approx./12V c.c. both
housed in a metallic box with removable cover. The Sequential System can be made by a maximum of 10 lights. On specific request it is possible to supply sequential systems with an higher number of lights, in this case please contact the us. The connection cables between the lights have a length of 12 meters. On request it is possible to have longer cables. For the systems with a total cables length that exceed the measure of 130 meters, it is recommended to install the power supply in the middle of the system, in this case please contact the us to request the T - shaped cable for the connection.