door entryphone

This door entryphone can easily and simply be connected either to one extension of your telephone system or - by using the EuraDECT GAP plug - to your DECT-base. You can memorise your call targets for each calling key and therefore different accommodation units can be adressed separately. Several call categories can be created when connected to a PBX so that more than one single telephone receive calls and ring. You can also integrate the Doorline into your day/night circuit or call diversion and that way use all added-feature comfort items similar to a telephone. After establishment of a voice connection to your door entryphone you can open the door via every telephone connected to your PBX. Furthermore, by using 2 switching contacts you can connect an additional bell, an additional door opener or an illumination unit (Actuator-function). Independent from the number of calling keys you only require 2 wires to your telephone system. The simple programming of the Doorline device via telephone and multifrequency dialing (MFV) as well as controlling of the switching units will be possible via programmable codes. The door opener can be connected to the Doorline system but requires a separate power supply (not included) what also enables you to use the integrated keypad illumination module. Highlights: connection to any a/b-interface possible up to 2 calling keys 2 additional relays up to a 25-digit extension number for each calling key programmable multifrequency dialing (MFV) remote configuration via telephone and PIN-code protection remote configuration of volume and microphone sensitivity door opener connectable automatic busy tone detection moisture barrier according to IP53 (splash water up to an angle of 60 degree) On wall or flush mounted fitting by included accessories possible. Switching contactsload capacity 12V switching output max. 12V AC / 1A load capacity of the potential-free switching contactmax. 250V AC / 2 A; max. 30V DC / 2A Measurements (mm)Aperture with calling keys: 104 x 234 x 17Finery frame: 100,3 x 230,3 x 28 Flush-mounting box 79,2 x 206 x 41,9