Safety Harness Belt

    When purchase and use safety belt, should inspect whether it is whole for components of safety belt and damaged. The loop of metallic fittings should not be welded and keep the edge smooth.
    When using electrician safety belt, the protective sleeve on post lanyard is not allowed to draw on the ground by holding the lanyard so as not to damage the sleeve and affect the main lanyards.
    Full body safety belts should not be hanged at lower place but operating person lies at the higher place.
    When using safety belt, should not allowed to be knotted.
     When using the long lanyard singly with the length of more than 3m, should consider adopting complementing measurements, for example, add lock hook, buffer or controlling fitting on the lanyard.
     Prior to each use, should make one inspection of appearance. In the course of use, should also look it up. Should test it for one time with half a year or one, subject to it that the main components are not damaged. If the damaging or deteriorating arises, should indicate the cases and stop using so as to ensure to operate safely.

3. Usage and maintenance:

  The capacity which electrician safety belt and full body safety belt can assume is more than 24515 KN.
  The breaking strength of fall prevention safety belt is more than 1961.2N and of its component energy absorber is more than 24515N.
 The breaking strength of lanyard is more than 29418N.
 The breaking strengths of metallic fittings are all more than 29418N, their hardness 40

1) Full body harness, safety harness, safety belt.
2) Material of straps: Polyester.
3) 2~5 attachment points.