Digi System Locators (30/50/80 metres)

DIGITRACE
30/50/80
   
Specifications  
DIGICAT 100 Art. No 731047
Frequency Power mode 50/60 Hz, Radio mode 1530 Hz
Generator mode 8 and 33 KHz
Depth Power to 3m, Radio to 2m, Generator to 3m
Protection Conforms to IP54
Batteries 6 x AA alkaline (IEC LR6) (supplied)
Battery life 40 hours intermittent use
Weight 2.83 kg including batteries
 DIGICAT 200 Art. No 731048
Frequency Power mode 50/60 Hz, Radio mode 15-30 Hz
Generator mode 8 and 33 KHz
Depth Power to 3m, Radio to 2m, Generator to 3m
Depth Estimation Depth estimation with DIGITEX (33KHz mode) or DIGIMOUSE.
To 3m within 10% accuracy (typical)
Protection Conforms to IP54
Batteries 6 x AA alkaline (IEC LR6) (supplied)
Battery life 40 hours intermittent use
Weight 2.83 kg including batteries
 
DIGITEX 8/33 Art. No 731049
Frequency 8 or 33 KHz
Constant dual frequency available in connection mode
Tracing Range Induction typically 150m, Connection typically 250m
Protection Conforms to IP57 (with the lid shut)
Included Accessories Crocodile equipped connection cable set with earth spike
Batteries 4 x C alkaline (IEC LR14) (supplied)
Battery Life 40 hours continous use
Weight 2.95 kg including standard accessories and batteries
 DIGITRACE 30/50/80
Art. No 731050/731051/731052
30/50/80 metre coil of copper conductor sheathed by fibre glass
Protection Conforms to IP57
Included Accessories Connections to DIGITEX 8/33 cable set
Weight 3.0/3
 

DIGITEX 833

DIGICAT 200

DIGICAT 100

System Components
The DIGICAT can be used to find live (energised) power cables, trace buried metal services which reradiate signals, and with the DIGITEX 8/33 signal generator via specific tracing frequencies give highly accurate results. The DIGITRACE service tracer allows tracing of plastic ducts, clay drains and other non-metallic conduits.
 

Light and easy to handle
The only cost effective way to trace the full length of a non-metallic conduit
Trace line highly resistant to harsh conditions
The DIGISYSTEM offers 3 selectable operating modes:
Power mode: locates power signals radiated by energised cables
Radio mode: traces signals originating from distant radio transmitters. These radio signals penetrate the ground and are re-radiated by buried metallic cables and pipes
Generator mode (8 and 33 kHz): locates a distinctive signal applied by the DIGITEX 8/33 dual frequency signal generator to a metallic underground conductor
How To Locate
Via receiving reradiated radio frequencies through internal aerials, detecting the strength and direction of the received signals the operator is given the location and direction of the underground service. Mark the location of the service on the surface of the ground, giving the excavation team clear indications of where not to dig.