C700 Firestop Acoustic Foam

?2005 - 2009 PFC Corofil Fire Stop Products. All Rights Reserved. | | |



Contact our technical sales office (Tel: 0208 391 0533) with the following details:

Install PFC Corofil Firestop and Acoustic (C700) Foam, using appropriate backing materials, into all joints up to 45mm wide to provide up to 4 hours' fire protection. Installation to be fully in accordance with manufacturer's instructions

White and grey. Additional colours are available depending on quantity requirements.

1 x 700ml can will yield up to 30ltr of foam.

Weighted sound reduction Index (Rw) of up to 57db. Please consult our sales office with details of:

Joint SizeSeal DepthFire rating
IntegrityFire rating
Insulation
15mm 120mm C700 only - wall 71 69
15mm 220mm C700 only - wall 240 240
15mm 200mm C700 only - floor 206 206
20mm 180mm C700 only - wall 86 86
20mm 140mm C700 only - floor 115 113
30mm 220mm C700/C144 core* (60mm wide) wall 240 240
30mm 250mm C700/C144 shutter* (100mm deep) floor 240 240
45mm 220mm C700/C144 core* (100mm wide) floor 240 240
45mm 250mm C700/C144 shutter* (100mm deep) floor 240 240

*C144 Firestop Strip is manufactured from 110 kg/m3 density slab. C700 Firestop and Acoustic Foam being a component of structure satifies both the integrity and insulation requirements as shown in the table above.

PFC Corofil Firestop and Acoustic Foam C700 can be identified from other builders' foam by its pink colour in the cured state.

Do not cut back the face of the foam once it has cured, as this will seriously reduce the fire resisting characteristics.

The foam is tack free in approximately 20 minutes and fully cured within 2 to 4 hours.

Fill the joint to approximately half it's width allowing the foam to expand. With larger joints it may be necessary to allow one layer to cure before foaming another layer on top.

Joints should first be clean, dry and free from dust, grease or any other loose material. The surfaces should be lightly moistened to ensure good adhesion. The can must be shaken vigorously for approximately 30 seconds and then the nozzle screwed onto the valve. The can is then inverted and the trigger depressed to extrude the foam.

PFC Corofil C700 Fire Rated and Acoustic Foam is a one part, moisture curing polyurethane foam. The foam is supplied in 700ml cans and is available in either hand held or gun grade cans.

PFC Corofil C700 Fire Stop and Acoustic Foam is suitable for filling gaps in fire rated block/brickwork walls and concrete floors. Tested to BS476 Part 20, C700 Foam has been shown to give up to 4 hours fire protection.

suitable for filling gaps in fire rated block/brickwork walls and concrete floors.

  • Country:
  • telephone:
suitable for filling gaps in fire rated block/brickwork walls and concrete floors.
*Your name:
*Your Email:
*To:PFC Corofil Sharqia
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Acoustic Foam

PU foam for sound shield, roofing, mooulded foam for seats Fire Retardant ...

Come From S.R.Trading Corporation