Data Wave Magnetic Synthesizer

Features include: 1 Single Phase Protection: Shorting, opening or unbalance of an input phase typically causes motors and transformers to overheat or go off-line. Datawaves unique design allows it to maintain 3-phase output voltage, even with the loss of one input phase, up to 60% load. 2 Transient Voltage Protection: Datawaves output voltage waveform is independent of input waveform, protecting the computer from high energy/spikes and ringing transients that can disrupt or damage your electronic systems. 3 Harmonics Isolation: Todays Electronic Systems are non-linear loads, which can cause reflected distortion-a problem for conventional power systems. The Datawave's controlled input current distortion prevents the loads current distortion from affecting the power system while the Datawaves controlled output voltage distortion prevents the power system voltage distortion from affecting the load. High neutral current can also be handled without the need for oversizing. 4 Energy Efficient: Nearly unity input factor means lower input current, while high operating efficiency results in lower utility cost and less heat output. 5 Overload and Unbalance load: Datawave is designed to support load imbalance, commonly caused by adding equipment to the load or by turning load on and off. It also handles the high in-rush and start-up current that are normally demanded by electronic systems. 6 Deep Sag Protection: Datawaves broad input voltage regulation range protects computer systems and other sensitive electronics from deep sags, which other technologies would consider outages.