2x Yamaha 01V96VCM pair------------ $1600usd

2x Yamaha 01V96VCM pair------------ $1600usd



Yamaha 01V96VCM Specifications:

Internal processing
32bit (Accumulator 58bit)
Number of scene memories 99

Sampling frequency
Internal 44.1kHz, 48kHz, 88.2kHz, 96kHz
External Normal rate: 44.1kHz-10% - 48kHz+6%
Double rate: 88.2kHz-10% - 96kHz+6%

Signal delay
Less than 1.6ms CH INPUT to STEREO OUT
(Sampling frequency = 48kHz)
Less than 0.8ms CH INPUT to STEREO OUT
(Sampling frequency = 96kHz)

Fader resolution
100mm motorized x17

Total harmonic distortion
Input GAIN=Min. CH INPUT to STEREO OUT
Less than 0.05%, 20Hz to 20kHz +14dB into 600ohms
Less than 0.01%, 1kHz +24dB into 600ohms
(Sampling frequency = 48kHz)
Less than 0.05%, 20Hz to 40kHz +14dB into 600ohms
Less than 0.01%, 1kHz +24dB into 600ohms
(Sampling frequency = 96kHz)

Frequency response
CH INPUT to STEREO OUT
0.5, -1.5dB, 20Hz - 20kHz +4dB into 600ohms
(Sampling frequency = 48kHz)
0.5, -1.5dB, 20Hz - 40kHz +4dB into 600ohms
(Sampling frequency = 96kHz)

Dynamic range
(maximum level to noise level) 110dB typ. DA Converter (STEREO OUT)
106dB typ. AD+DA (to STEREO OUT) fs=48kHz
106dB typ. AD+DA (to STEREO OUT) fs=96kHz

Hum & noise level
(20Hz-20kHz)
Rs=150ohms
Input GAIN=Max
Input PAD=0dB
Input PAD=0dB
Input sensitivity=-60dB -128dB Equivalent Input Noise.
-86dB residual output noise. STEREO OUT
STEREO OUT off.
-86dB (90dB S/N)STEREO OUT
STEREO fader at nominal level and all CH INPUT faders at minimum level.
-64dB (68dB S/N) STEREO OUT
STEREO fader at nominal level andone CH INPUT fader at nominal level

Maximum voltage gain
74dB CH INPUT (CH1-12) to STEREO OUT/OMNI (BUS) OUT
40dB CH INPUT (CH13-16) to STEREO OUT
74dB CH INPUT (CH1-12) to OMNI (AUX) OUT (via pre input fader)
74dB CH INPUT (CH1-12) to MONITOR OUT (via STEREO BUS)

Crosstalk(1kHz)
Input GAIN=min 80dB adjacent input channels (CH1-12)
80dB adjacent input channels (CH13-16)
80dB input to output
Total Harmonic Distortion is measured with a 6dB/octave filter 80kHz.
Hum & Noise are measured with a 6dB/ octave filter 12.7kHz;equivalent to a 20kHz filter with infinite dB/octave attenuation.

Power requirements
Japan: AC100V 50/60Hz, 90W
North America: AC120V, 60Hz, 90W
Other Areas: AC220-240V, 50/60Hz, 90W

Dimensions
(W x H x D) 436 x 150 x 548 mm / 17.2 x 5.9 x 21.3 in

Weight 15kg / 33.1lbs