pad-28(m) inflatable Boat
Product Details
In order to use materials of inflatable Boat, the basic properties of PVC materials are as follows:
easier process cold-resistance, heat-resistance, air-tightness, strong adhesion UV stability. |
|
|
Glue |
Type: Poly Urethane Product Properties Soild : 29 +_1% Specific Gravity : 0.880 Viscosity : 55~60 ps / 30 Diluent : MEK, MIBK Application Clean a adhesion part in MEK Paint a adhesion part in Glue. Drying for 10min at 60 |
|
Hot air welding type These materials are from PVC material, which is the one of the Thermoplastic Polymer, therefore Hot Air Welding recommended for its application and welding speed for Hot Air system should be accorded with following table. Incase welding condition is out of above range, the welding condition should be considered for each circumstance. |
|
Glue Hot air welding type |
|
Remove and avoid to contact dirt and watch out staining by a necessary material. Dry in the normal condition and room temperature. |
pad-28(m) inflatable Boat
