Fickert Abrasive Brush

Most marble could get the antique effect directly  dealing with it ,showing the nature light ,and could have the antifouling and skid prevention. As some stone before grinding ,according to need and structure ,dealing with in advance in physical methods  ,then using the grit no from thick to thin to grind it, until the pan could get the satisfied effect .

What's the effect for marble after grinding ?

The granite after grinding ,have the uneven archaized effect ,showing the nature light ,and could have the antifouling and skid prevention. wishing to get the above effect ,before the grinding  it must be dealt with the flaming pan .  and so on surface; first using steel brush removing the surface and fix it ,then using the abrasive brush from thick to thin ,until to get the satisfied effect .

What's the effect for granite after grinding ?

If adding the height of the filaments unwisely ,then wont guarantee the rigidity, it will fall down during working ,so filament side over grind and cause them thin ,then will rapture earlier and loss their life .

Not allowed, because the life of brush depends on the making craft, filaments quality and right using method.

Is longer life ok by higher filaments?

The filaments should have the long life.

The filaments should have the good wave resilience.

The appropriate height and density of the brushes.

The silicon carbide grit in the filaments shouldnt break off because of the wave shape filaments.

Filament should be bended wave shape.

The filaments fixed to the frame with high strength stainless steel wire prevented from corrosion.

The filaments cannot brush off during working.

How to identify the quality of brushes?

Decreasing the possibility of filaments broke off because of centralized, guarantee the best life of our brush.

Increasing the hardness of the filaments, improving the polish efficiency.

Make the filaments separate each other, more uniformity grinding on the stone surface.

Strengthening the elastic of the filaments, to guarantee the best polish effect of our brush.

Why does it adopt wave shape filaments?

Nylon 612 can retain rigidity and tenacity in humidity circumvents .With adding water ,the other kind of nylon will be softening and loss rigidity .Nylon 6/66/610 comes from biology and petroleum polymer without consistent quality .Nylon 612 with lower bibulous and density characteristic is the best filament for abrasive brush .

Why adopt nylon 612?

Used in granite automatic grinding line

Technical form

Fickert Abrasive Brush

Fickert Abrasive Brush