Mill/Drill Unit Micromot 50

PROXXON Micromot 50 Ball bearing spindle and efficient cooling system facilitate continous use All models are fitted with precision ball bearings to minimise axial and radial play. The spindles are precision ground HSS, machined to accept MICROMOT collets or the optional keyless chuck. The drive motor is a specially balanced, permanent magnet unit, operating on 12-18 V DC. The radial fan facilitates optimal cooling, reducing overheating induced power losses and enabling extended periods of use. An easy to use spindle lock knob eases bit changing. All housings are made of fibreglass reinforced nylon, maximising impact resistance. The pen-like grip is ergonomically designed to ensure accuracy even when engraving delicate patterns. The 20 mm collar fits MICROMOT horizontal stands and drill press stands.Three hardened, triple slit collets, yielding high concentricity, are included. The 150 cm spiral cable is fitted with a non-reversible plug. MICORMOT power supplies of 1 A (12 VA) or larger are recommended. - 1001 uses: milling, drilling, routing, de-scaling, polishing, cutting, cleaning, sawing, engraving etc. - Useable on any workable material e.g. steel, precious metals, glass, ceramics, plastics, precious stones etc. - 12 V supply allows the safe use of coolant, e.g. when grinding and cutting semi-precious stones! - Ideal for electronic hobbyists, model builders, tool and die makers, jewellers, opticians, artists, chiropractors, dental technicians etc. - RFI suppressed to VDE. 1 The MICROMOT standard 20mm collar allows use in the drill stand MB 140/S, router base OFV, stand UH 34 and angle adapter WS 90. 2 Stable housing of fibreglass reinforced POLYAMIDE. With soft gripping area for extended use during hours. No load speed is 20.000 rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds. 6 MICROMOT collets for shanks in the range 1.0, 1.5, 2.0, 2.4, 3.0 and 3.2 mm are supplied. Power consumption is 40W, max. length 220 mm and weight approx 230 g As MICROMOT 50/E, except that no speed control is fitted.