Small Hole Drilling EDM / SD-2M
Product Details
- SD2M drills through almost any conductive material including tungsten carbide,harness steel, iron, copper and brass.
- SD2M opens even big sized holes using hollow and multi-channel copper electrodes diameter from 0.0118"(0.30mm) to 0.256"(6.50mm) at high speed with 50amp power supply.
- With extremely low electrode wear(10%~20%) in low wear machining. it delivers overwhelming cost effectiveness when compared with similar machines.
- The versatile, swivelling and swinging head can easily open angel holes on flat. spherical and curved surfaces. if also works on pieces too large to be clamped to the worktable.
- SD2M provides an EDM machining operation with an oil-free, carbon-based dielectric fluid.
- Inch/metric conversion
- M-function
- 0.0004"(0.01mm) resolution
- 50Amp Power Supply
SD2M drills through almost any conductive material including tungsten carbide,harness steel, iron, copper and brass.
- Country:South Korea
- telephone:82-032-665-4146
| SD2M drills through almost any conductive material including tungsten carbide,harness steel, iron, copper and brass. |
Send inquiry / quota request to Small Hole Drilling EDM / SD-2M
Relate products of Small Hole Drilling EDM / SD-2M
Our edm hole drilling machine for sale are designed for the highest levels of accuracy, incredible reliability and high quality. Increasing productivity and saving time, small edm drilling machine provided by us is your best choice for drilling small hole. Come and contact us ...
Come From Beijing Dimon CNC Technology Co.,Ltd
Manual EDM has X and Y axis manual control, use handwheel to move to the location of drilling position according to a digital readout of linear scale. Usually, it\'s ideal to process holes with small diameter but big depth, especially material that can’t be machined by the ...
Come From Beijing Dimon CNC Technology Co.,Ltd
KD-DZ850C EDM Small Hole EDM Machine Features 1. The maximum stroke of the Z axis is 380mm, which can hold 500mm long electrodes, and the waste of the electrode tube is minimized to about 100mm. The ultra-low wear circuit design is used to greatly improve the use ratio of the ...
Come From Beijing Dimon CNC Technology Co.,Ltd
