Description of intelligent mower
1) Full-automatic grass mowing by microcomputer processor;
2) Drive insects away by ultrasonic radar;
3) Intelligent moving function;
Intelligently adjust moving speed according to lawn density, namely reduce moving speed in the areas with dense grass while increasing moving speed in the areas with
sparse grass and spiraling outwards in the areas with very sparse grass. In such a way, the service lifetime of grass mowing electric motor and batteries can be ensured, furthermore, grass mowing
efficiency can be increased and the service lifetime of machine electric circuits can be greatly extended.
4) Intelligent mower can automatically change direction when meeting any obstacles to accomplish barrier-avoiding capabilities.
5) After being damped by rain, the mower stops operation, its procedure of find charging base is started up immediately to find charging base and stop inside it.
6) When batteries run out, the mower will stop operation, its procedure of find charging base is started up immediately to find charging base and stop inside it for charging. After being charged,
the machine can continue operation according to preset procedure.
7) Humanistic adjustment for grass mowing height makes it possible for users to adjust height without the need of touching the blade or machine base plate. Adjustment methods and graduation are
clear at a glance.
8) Blade safety control ;
When people or animal comes closer, the machine can automatically stop the blade, reliably realize the function of stopping machine operation when the machine is lifted from
the ground in a oblique and horizontal way, and improve the safety of machine operation.
9) Remote control function ;
Realize directional moving, grass mowing, barrier-avoiding, startup/closedown of machine etc by means of the instruction of remote controller;
10Preventing be stolen function
The mower has Dual-boot function. It could not be started without the remote contral. The buzzer in the machine will alarm suppose it was forced taken away by someone
when it was working or charging.
11) Charging base contains electronic fence ;
Electronic fence is a cable line loaded with modulating signal. Circle the grassland with this cable line in advance. So, the machine will not leave this assigned range
when mowing grass.The cable line contains a wireless transmitting waveband.Once fence line has no power, wireless transmitting will be stopped and mower stops operation to prevent the machine
from leaving the assigned range when electronic fence has no power. And make electronic fence integrate with charging base.
12) The design of blade turning switch doubles the blade service lifetime. If one side of the blade is damaged, the mower can switch to anticlockwise grass mowing, because both sides of the blade
are sharp.
Mowers function parameters
Cutting speed: 21meters/minute
Cutting height: 2.5cm6.5cm
Largest coverage: 3500 (the largest scope which could be contraled by the procedure)
Advised cutting scope: 500
Average coverage: 127/hour (Example: cutting 254mm green land cost two hours)
Machine size: 650mm*550mm*280mm
Weight: 8.3kgs (not include the weight of the battery)
Cutting power: 100W
Maximum slop:30 degrees
power supply supports 110-240V electric outlets
batteries: Li-ion battery or Lead-acid battery.
robot lawn mower,robot mower,automatic lawn mower
intelligent and automatically prune your lawn, to save time for you to enjoy life