Paint Sprayer

E. Groundingthis equipment should connect with 10 A grounded triplex receptacle outlet, and only applicable to power supply of 220V 50Hz and ensure that the power is properly grounded.

(4) Wear protective eye shade

(3) Do not spray when it is windy.

(2) Obey with all the applicable safety standards concerning ventilation, fire fighting and operation.

(1) Use respirator or mask in the area may inhale volatile substance

Preventive Measure:

D. dangerousdangerous volatile substanceif breath in paint, solvent, pesticide and other material, may cause serious nauseous, fainting & toxicosis

(2) Do not sue halogenated hydrocarbon solvents such as methylene dichloride and 1.1.1trichloroacetic acid which are incompatible with the aluminum and may result in explode. If you are not sure the substance is compatible with aluminum or not, please consults with the paint supplier.

(1) Do not use bleaching agent

Preventive Measure:

C. dangeroususe incompatible material may cause exploderesult in property damage and casualty:

(5) This equipment is not suitable for spray oil paint and high volatile solvent, if there is any special need, please contact with the factory and make to order.

(4) Keep motor far away from the solvent and paint volatile.

(3) Work field must be equipped with fire-extinguishing equipment.

(2) Do not use the equipment when there are ignition sources for instance: static sparking, open fire, hot substance, cigarette, etc.

(1) Try to be installed with exhaust and new wind generating units, or use equipment in well ventilated area to prevent the volatile gas accumulation.

Preventive Measure:

B. dangerousExplosion or fire hazardsolvent and paint volatile substance may cause ignite or explode and result in property damage and casualty

(5) Before use, check each part of hose is in good condition every time. Abrasion, distortion, and improper use to the hose will lead to its leak.

(4) When spray, be sure to set the guard device of spray tip at position. Spray tip guard device can provide certain protective effect to the fluid injection.

(3)     Never put your hand in front of the gun to test the flow, gloves cannot prevent the injection hazard effectively. Always lock the trigger safety lever when cleaning and replacing spray tip

(2)     Never let any part of your body touch the sprayed flow from the gun, leaks or ruptured components.

(1)     Never point the spray gun to any part of the body.

Preventive Measure:

Attention: The maximum work pressure is 20Mpa (200kgf/cm2)

A. dangerousfluid injection hazard high pressure fluid generated in the equipment can penetrate skin and into your body and cause extremely injury. Dont treat the spray injury as normal injury. 

2. Safety rules

After use or in transportation, put the suction hose and press relief hose into it.

connect cup

When spray stopped, the rest paint will backflow to the paint pail

pressure relief hose

Put into the paint pail to suck the paint

suction hose

Hose connect between the equipment and spray gun. The ordinary length is 15m, which can connect 60m length.

high pressure hose

Use as safety valve in spray operation and pressure relief valve after operation, turn clockwise, valve in shut off (operation) state and turn counterclockwise, valve in opening (pressure relief) state.

Pressure relief valve

After use, remove the fill cap and add 5-6 drops of seal oil.

Oil fill cap

2.      display equipment pressure value MPa

1.       set pressure value MPa

Display Board

Setup and control spray pressure,up increase pressure; down decrease pressure,the regulating range is between 0~20 Mpapressure value will increase or decrease by 0.5MPa for each press; if press button constantly, the setting value will change constantly.

Touch type pressure adjust knob

Control the operation and stop of the equipment. open power switch, after 2 seconds, display 000 in the display board( DD802 display.., set spray pressure and the equipment is in the state of work.

Power switch

Connect 220v AC power source

Power cord & plug

1. The constitution of equipment and function information

Thank you for choosing and using the electric high pressure airless paint sprayer from our company. Please read the instruction manual carefully in advance to ensure proper operation. Please contact the serviceman or the company for anything unclear

1.Electric High Pressure Airless Paint Sprayer
2.Easy for Maintenance .