Moisture Meter Non Abrasive for Wood and Building Materials

The MC-500 allows moisture detections in wood down to a depth of approx. 40 mm. It is designed for quick-response detection of moisture content in wood and building materials as well as locating wet areas in floors, roofs and walls made of homogeneous material.

It is even able to detect moisture behind ceramic tiles or behind and under various floor or wall coverings. Simply place device on top of the surface to be examined no injection into the object required!

FEATURES:

Pin-less & non-destructive: Capacitance measurement using a high frequency dielectric field
Could be used on different materials as wood, concrete, cement wash floor, brick, plaster, gypsum board, clinker and clay floor tiles, sandstone, marble, etc.
Quickly indicates the moisture content of materials
Moisture detection down to a depth of approx. 40 mm
Low battery indication
Impact resistant ABS housing
Complete with 9V battery

MC-500 can be used for:

Detection of moisture in wood and other building materials
Detection of leakage
Finding electrical cables and reinforcement bars

TECHNICAL SPECIFICATION	MC-500
MEASURING METHOD	Dielectric constant measurement
MEASURING RANGE-WOOD	030% moisture content
MEASURING RANGE-BUILDING MATERIAL	dry/moist/wet
SCANNING DEPTH APPROX.	40 mm
AUTOMATIC SWITCH OFF	Yes
LOW BATTERY WARNING	Yes
OPERATING TEMPERATURE	0 to +50

wood and building materials
MC-500
Low Cost Moisture Detector - Pin-free

Model Number:MC-500
Brand Name:Exotek Instruments AB
Place of Origin:Sweden

Country:Sweden
telephone:46-8-7921325


Model Number:	MC-500
Brand Name:	Exotek Instruments AB
Place of Origin:	Sweden

*Your name:	Enter name here eg:Ralph zhang
*Your Email:	Enter email here
*To:	Exotek Instruments AB
*Subject:
*Message:
	Enter between 20 to 3,000 characters. English only. Characters Remaining: 0 / 3000
*Enter the secure code shown below	Reload Image