MOISTURE METERS

The MC-500 allows moisture detections in wood down to a depth of approx. 40 mm. It is designed for quick-response detection of moisture content in wood and building materials as well as locating wet areas in floors, roofs and walls made of homogeneous material.

It is even able to detect moisture behind ceramic tiles or behind and under various floor or wall coverings. Simply place device on top of the surface to be examined no injection into the object required!
FEATURES:
  • Pin-less & non-destructive: Capacitance measurement using a high frequency dielectric field
  • Could be used on different materials as wood, concrete, cement wash floor, brick, plaster, gypsum board, clinker and clay floor tiles, sandstone, marble, etc.
  • Quickly indicates the moisture content of materials
  • Moisture detection down to a depth of approx. 40 mm
  • Low battery indication
  • Impact resistant ABS housing
  • Complete with 9V battery
MC-500 can be used for:
  • Detection of moisture in wood and other building materials
  • Detection of leakage
  • Finding electrical cables and reinforcement bars
TECHNICAL SPECIFICATION MC-500
MEASURING METHOD Dielectric constant measurement
MEASURING RANGE-WOOD 030% moisture content
MEASURING RANGE-BUILDING MATERIAL dry/moist/wet
SCANNING DEPTH APPROX. 40 mm
AUTOMATIC SWITCH OFF Yes
LOW BATTERY WARNING Yes
OPERATING TEMPERATURE 0 to +50

wood and building materials
MC-500
Low Cost Moisture Detector - Pin-free

  • Country:Sweden
  • telephone:46-8-7921325
wood and building materials
MC-500
Low Cost Moisture Detector - Pin-free
*Your name:
*Your Email:
*To:Exotek Instruments AB
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Smart Meter IEC104 DL/T645 to BACnet/IP Ethernet Monitoring Gateway

The BA102 is an energy management gateway with Ethernet ports and RS-232/485 serial ports. BLIIOT BA102 energy management gateway supports DL/T645, IEC104, Modbus RTU, Modbus TCP converting to BACnet/IP protocol. BACnet energy management gateway allows for both BACnet and ...

Come From Beilai Technology Co.,Ltd

Optical Power Meter With VFL

Fiber optic power meter with vfl refers to an optical power meter that combines the functions of a visual fault locator (VFL). It is mainly used for continuous optical signal power measurement and fiber line continuity testing. It can be used for absolute power measurement and ...

Come From Shenzhen Puhuixin Tecnhnology Co., Ltd.

Optical Power Meter

An FTTH optical power meter (OPM) refers to an instrument used to measure absolute optical power or relative loss of optical power through a section of optical fiber. In fiber optic systems, measuring optical power is the most basic. By measuring the absolute power of the ...

Come From Shenzhen Puhuixin Tecnhnology Co., Ltd.