DPM13 Digital Panel Meter

                                    IEC 62052 Class 2

Standards             :   IEC 61010-1

Weight: 320 gm.

Panel cut out: 90⁺¹X 90⁺¹ mm.

Dimensions: 96X96X71 mm.

Degree of protection: IP 40 (front panel)

Humidity: < 75% RH non-condensing.

Operating temperature:-5 ^{?/SUP>C : 55 ?/SUP>C}

Mechanical Parameters:

Power consumption: < 1 watts.

Display: 3X3.5 digits (7 - segment,14 mm height-   highly illuminated red display)

Sampling rate: 833k. Samples/sec. @ 50 Hz.

Power supply voltage: From 85-280 VAC (thanks to the well     designed switch mode power supply)

  a separate power supply.

Power supply          : From the measured voltages ?no need for 

Operating frequency: 45-65 HZ

Current measurement range: 50 mA ?6 A (i.e. from 1% to 120%   of full scale)

Current transformer ratio: 5/5 to 2500/5

Current: 5-amp from external current transformer.

Volt measurement range 85-270 V_PH

Voltage: 380 / 220 VAC

System  : 3-phase, 4 wire unbalanced load.

Electrical Parameters:

- Frequency.

- Total Value for 3 phase power factor.

- Total Value for active power in KW.

- Maximum demand (KW).

- Total reactive energy consumption (KVARH).

- Total active energy consumption (KWH).

- 3 phase currents (I_L1, I_L2, I_L3).

  (V_L1-N, V_L2-N, V_L3-N, V_L1-L2, V_L2-L3, V_L3-L1)

- AC RMS values of 6 different voltages

DPM13 is a 3-phase power meter plus being a multimeter that measures, stores and displays: