DT-3347 1000A AC/DC True RMS Clamp Meter

Function

Features:
1.Double molded housing
2.4000 counts digital display with backlight
3.Electronic overload protection
4.Auto Power Off and Low Battery indication
5.Data Hold function and Peak Hold function
6.Analog Bargraph/segments
7.DCA Zero function
8.True RMS measurement
9.AC/DC Current
Data Hold Button
This is a function used to freeze the reading on the display,ideal for later viewing.
press the HOLD button once.When the Hold is activated,the meter beeps,freezes the reading,and displays the HOLD indicator on the LCD.
To deactivate the HOLD function,press HOLD button once,the meter will beep and the meter will start reading new measurements.
PEAK HOLD
This is a function used to record the maximum and minimum readings on the display for the voltage and current ranges.
1.Press the PEAK button once.This will record the PEAK maximum,the meter beeps,and displays the P MAX indicator on the LCD.
2.Press the PEAK button again.This will record the PEAK minimum,the meter beeps,and displays the P MIN indicator on the LCD.
3.To deactivate the PEAK function,press button for 3 seconds, the meter will beep and the meter will start reading new measurements.
LCD BACKLIGHT
The backlight is ideally used in dark or dimly lit areas.
1.Press the button for 3 seconds, and the bright while light will come on.
2.To turns off the backlight press the button for 3 seconds.
Note: The use of the backlight will reduce the battery life considerably.
Specifications: