H5CX-A time-meter

Standard No.: UL508
File number: E41515

IEC60529(JEM): Panel surface: IP66, Case rear: IP40, Terminal block: IP20
NEMA: NEMA4X
(Only Panel surface, when Y92S-29 Waterproof Packing used.)

100000 operations min.(5 A at 250 VAC resistive load at 1800 operations/h)

10000000 operations min. (under no load at 1800 operations/h)

98 m/s2 3 times each in 6 directions(3 axes)

294 m/s2 3 times each in 6 directions(3 axes)

10 to 55 Hz 0.35 mm single amplitude four cycle each in 3 directions(8 min per cycle)

10 to 55 Hz 0.75 mm single amplitude four cycle each in 3 directions (8 min per cycle)

Mulfunction: 8 kV ,Destruction: 15 kV

Between power terminals: +-1.5 kV
Between input terminals: +-600 V
Square-wave noise by noise simulator (square-wave noise by noise simulator (pulse width: 100 ns/1 us 1-ns rise))

between power terminals: 3 kV
between current-carrying terminals and exposed non-curernt-carrying metal parts: 4.5 kV

between current-carrying metal parts and non-curernt-carrying metal parts: 2000 VAC 50/60 Hz for 1 min
between input and control output and operation power circuit: 2000 VAC 50/60 Hz for 1 min
between non-continuous contacts: 1000 VAC 50/60 Hz for 1 min

100 MOhm min. (at 500 VDC)
between current carrying metal parts and exposed non-current carrying metal parts, between non-continuous contacts

Accuracy of operating time and setting error (including temperature and voltage influences)
Power-ON start: 0.01% 50 ms max. Rated against set value
Signal start: 0.005% 30 ms max. Rated against set value
Signal start: 0.005% 3 ms max. Rated against set value(The value is applied for a minimum pulse width of 1 ms.)
The values are based on the set value.

TIMER Intuitive setting enabled using DIP switch (H5CX-A/-A11 models) and ergonomic up/down digit keys