channel bag filter timer

 The Sequence Timer is specifically designed for use in Dust Collectors. The filter bags used in the dust collector gets clogged up by dust and it is unable to allow further cleaning unless the accumulated dust from the filters are removed. A high pressure air jet is momentarily injected in the filter. This shakes the filter and removes the accumulated dust, thus cleaning the filter.

, Longitude, Latitude and the hemisphere of the place where it has to be installed. The timer calculates the sun rise and set time on the day of the year and accordingly switches on the relay at sun set and switches it off at sun rise. An additional Light Dependent Resistor Input is also provided so that in case the ambient light goes down the relay switches on.The Timer displays the time in hour, minutes and seconds. It also displays the date, month and year. The day of the week is displayed by 7 LEDs.

The Sequence Timer RUT-10 is a 10-channel timer designed for switching ON loads sequentially with an adjustable on and pause times. The on time is the same for all channels. During the ON time the load connected to the particular channel is switched ON. The pause or OFF time is the same between two ON times. The complete sequence is cyclic and at the end of one complete cycle the sequence re-starts automatically.

The Almanac Timer is designed such that a relay is operated in conjunction with the sun rise and sunset according to the local time of the place where it is located. All that is required is to key in the Green Witch mean time