Digital Preset Timer

Digital Timer Model FC2541 FC2561 offered by FABROTECH are useful for time and control application in various industries. The 4 or 6 digit Timer can be used in different combination of Hour, Min. & second covering the time range from 0.1 second to 9999 or 999999 Hour with the help of dip switches. It can be RESET by front switch or from rear terminal. The UP or DOWN counting or cyclic mode can be selected through dip switch. Cyclic mode can have equal ON & OFF time OR unequal OFF+ON time set by 2+2 (4digit) & 3+3 (6digit) thumbwheel switches. 4/6 nos. of 0.56 inch height bright red seven segment LED?s display the time. The output is provided through 1 or 2NO/NC relay contacts rated at 5A/230V. Output can be delayed ON or delayed OFF. Relay can be latched or AUTO RESET (the relay activation time of 1sec. is provided by factory for AUTO RESET). In case of power failure the display time is stored in non volatile memory. The power consumption is less than 5 Watts. Operating supply voltage is 230 V AC + 10%, 50Hz. Housed in enclosure of DIN size 96(H) x 96(W) x 110(D)mm.