Model 1094B GPS Satellite-Controlled Clock

Power Requirements:Standard: Voltage:  85 to 264 Vac, 47 to 440 Hz, 20 VA maximum or 110 to 350 Vdc, 15 W maximum Inlet:  IEC-320 with fuse and mating cordset. Specify option P01 - P10 Available cordset plug style and specifications are described in the Options and Accessories section Interface:Operator: Display: 

• 2 x 20 character supertwist LCD
• White LED backlight

Functions: 

• Time: UTC or local
• Position: latitude, longitude, elevation
• Clock status
• 1 PPS (input) deviation
• Event time

Status LEDs: 

• Operate (green)
• Stabilized (green)
• Unlocked (red)
• Fault (red)

Keypad:  Eight keys Setup: 

• Local time offset
• IRIG-B: Local/UTC/1344
• Daylight Saving Time: On/Off/Auto
• Backlight control: On/Off/Auto
• Event input: Event/1 PPS deviation
• Programmable Pulse setup
• Antenna cable delay
• Out of lock time: 1 to 99 minute(s), Off, or Zero Delay
• Auto-Survey
• Serial port: RS-232

System: RS-232:  1200 to 38,400 baud; 7 or 8 data bits; 1 or 2 stop bits; even/odd/no parity Interrogate mode  Broadcast modes: 

• Standard ASCII (IRIG-J)
• Extended ASCII
• ASCII with Time Quality
• ASCII with Time Quality and Year
• Vorne large-display time
• Status
• Event

Connectors:  2 Male 9-pin D-sub Com 1 and Com 2(TXD, RXD, AUX IN, AUX OUT) RS-422/485  Transmit only, to drive multiple devices. Two outputs. Uses extra pins on Com 1 and Com 2. Model 1094B Specifications Receiver Characteristics:Timing Accuracy: Specifications apply at the 1 PPS output, in the presence of Selective Availability (SA), as of date of publication.