Propellar water meters MP-01
Product Details
Nominal diameter: DN 40, 50, 65, 80, 100.
Working Temperature: for cold water up to 50oC / for hot water up to 130oC.
Working pressure max. 1,6 MPa (16 bar).
Characteristic features:
- possibility of mounting on horizontal pipelines with counter set upwards,
- materials approved for contact with potable water,
- possibility of electronic check-up,
- metrological class: cold water meters - class B / hot water meters - class C,
- wide measurement range and low starting flow rate,
- removable measuring insert,
- easy read-out due to an adjustable rotary counter,
- counter of roller-pointer type housed in airtight casing with all gear wheels in dry space,
- rotor axle perpendicular to pipe axies,
- magnetic clutch,
- possibility of remote counting of water capacity and flow rate (data according to a separate card),
- counter casing with a cover for request,
- conformity with the standards ISO 4064, BS 5728.
- water meter for cold water WATER METER MP-80-01;
- water meter for warm water 130?C WATER METER MP-130-80.
Propellar water meters / metrological class: cold water meters-class B / hot water meters-class C.
- Model Number:MP-01
- Brand Name:APATOR POWOGAZ
- Place of Origin:Poland
- Country:Poland
- telephone:48-61-8418234
| Model Number: | MP-01 |
| Brand Name: | APATOR POWOGAZ |
| Place of Origin: | Poland |
Send inquiry / quota request to Propellar water meters MP-01
Relate products of Propellar water meters MP-01
The BL120 is an industrial Ethernet gateway with 2 Ethernet ports and 2 RS-232/485 serial port. BLIIoT BL120 gateway supports Modbus RTU/Modbus TCP to Modbus TCP industrial protocols conversion. The Modbus RTU to Modbus TCP Gateway usually required when metering devices using ...
Come From BLIIOT
A Single Jet Wet Type Liquid Sealed Vane Wheel Water Meter is a type of flow meter commonly used to measure the volume of water passing through a pipe. It works by utilizing a vane wheel which rotates as water flows through the meter. The rotation of the vane wheel is then ...
Conventional smart water meters use a built-in lithium battery when controlling the opening or closing of the water valve. After the lithium battery has been used for a certain period of time, it cannot supply energy to the control circuit and has to replace the battery. It is ...
Come From JINZHOU KAIMEI POWER CO.,LTD
