Massflow Gas Flow Controller

LAMBDA MASSFLOW gas controller:The MASSFLOW is a new mass flow controller system especially designed for use with Lambda laboratory bioreactors and fermenters.For example, it allows control of the pH of a cell culture by the controlled addition of gaseous CO2, the control of dissolved oxygen, by regulation of the airflow or any other gas with a suitable controller.However, it can also be used independently, since all functions can be controlled from the front panel of the MASSFLOW.The gas flow rate is measured by high quality laminar mass flow sensor tubes and is displayed on a digital display. The mass flow cell has a very low pressure drop (less than 1 cm of H2O) and a linearity error of less than +/-3 % reading (which is much better than the precision expressed as a percentage of full scale used by some manufacturers). The repeatability is better than +/-0.5 % per reading.The gas flow rate is regulated by a specially developed proportional needle valve controlled by a microprocessor.Up to 50 pairs of flow rates and times can be programmed. This allows the flow to be switched on and off or the setting of any flow rate for a desired time interval.LAMBDA - Laboratory InstrumentsWhere innovation keeps quality high and prices low