PCB's FOR ELECTRONIC WEIGHING SCALE

Increment size ('Count by'):X1,X2,X5,X10,X20 or X50 (Maximum set by Full Scale Increments)Full Scale Increments:Choice of: 1000,2000,2500,3000,4000,5000,6000,8000 and 10000.Zero Indication:"Zero" indicator illuminates when scale is within +/-0.25 increment of gross zero.Over capacity:Display will blank if scale is over 2 increments above programmed scale capacity.Under zero display:Display will blank if scale is 2 increments under zero.Initial/Span range:Initial range is 0 to 20 millivolts; span range is 5 to 30 millivolts, both referenced to a 30 millivolt load cell output. The span range may be increased to 45 millivolts for use with 3mv/V load cells through an internal shorting jumper.Sensitivity:0.50 microvolts per increment minimum.Resolution:Up to 1 part in 10,000 displayed, Up to 1 part in 100,000 internal.Load Cell Excitation:Provided for up to six 350 ohm or eight 725 ohm load cells. Load cell excitation voltage is nominal 12.5 volts.Stability:[To be determined by test]Operating range:[To be determined by test]. Target: -10 to 40 degrees Celsius at 10 to 95% relative humidity, non-condensing.Motion detection:The Zero and Tare functions are inhibited while the weight display is changing.Automatic zero maintenance:Weight indication within +/- 0.1 increments of the center of zero is compensated to zero. Total compensation range is 4% of full scale. Weight variations which occur at a rate of 0.1 increments per second or slower will be compensated.Digital Filter:Selectable (through the keyboard) to reduce the effects of vibration and extreme motion. 4 settings are available.Power requirements:240VAC 50Hz. Or 6V DC Power consumption is 12 watts (or less).Product brief goes here. You may also create a link to this page from one of the 2 x 2 or 1 x 2 pages. Double click on add to cart and click on select link page to setup Paypal details for ordering.